We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass lock cylinder with satin chrome finish

Kaba Ilco Corp

Kaba Ilco Corp Lockset Cylinder 15395SC-26D-34532 door lock

SKU CH-12A6-1QPB9

Commercial-grade key-in-knob cylinder with satin chrome finish, Schlage C keyway and two cut keys

  • TypeKey in Knob/Lever
  • ANSI Grade 1 certified for heavy-duty commercial security
  • Schlage C keyway fits existing master-key systems
  • Brass core with satin chrome resists wear and corrosion
  • Pre-cut to bitting 34532 with two keys included
  • Five-pin cylinder meets ANSI A156.5 Grade 1 standard

Commercial Grade 1 Cylinder

This Kaba Ilco lockset cylinder is a commercial-grade Key in Knob/Lever unit built to ANSI A 156.5 Grade 1 standards. It uses a brass core with a satin chrome finish and a Schlage C keyway. The cylinder arrives cut to bitting 34532 and includes two keys. It suits specifiers and facility managers who need a Grade 1 replacement cylinder for existing commercial hardware.

Fits Standard Schlage C Hardware

The cylinder installs into compatible Key in Knob or Lever housings that accept a Schlage C keyway. Its five-pin brass construction matches the mechanical tolerances of that platform, so it works with the existing latch, chassis and trim already on the door. No additional cylinders or keyway adapters are required, and the Grade 1 rating confirms it meets the durability demands of high-traffic commercial openings.

Two Pre-Cut Keys Included

The package supplies two brass keys already cut to the 34532 bitting, so the cylinder operates immediately without a separate key-cutting step. This eliminates the scheduling delay and cost of cutting keys on site and ensures the keying matches the cylinder pins from the factory. No software, programming tools or credential cards are involved.

Highlights

  • ANSI Grade 1 certified for heavy-duty commercial security
  • Schlage C keyway fits existing master-key systems
  • Brass core with satin chrome resists wear and corrosion
  • Pre-cut to bitting 34532 with two keys included
  • Five-pin cylinder meets ANSI A156.5 Grade 1 standard

Specifications

BrandKaba Ilco
TypeKey in Knob/Lever

Questions about this item

How long will the ANSI A156.5 Grade 1 brass cylinder last under heavy daily use?

The lockset cylinder meets ANSI A156.5 Grade 1, the highest durability standard for commercial hardware, built from brass with a satin chrome finish to resist wear in high-traffic doors.

Does the 5-pin Schlage C cylinder generate heat or noise during continuous operation?

As a purely mechanical key-in-knob cylinder with five pins and a Schlage C keyway, it has no electronic parts, motor or power draw, so it runs silently and stays at ambient temperature.

What existing hardware is required to install the 15395SC cylinder with keying 34532?

You need a compatible key-in-knob or lever lock housing that accepts a standard Schlage C keyway cylinder, plus a Schlage C key blank if additional keys beyond the two supplied are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.