Jstincal 2-Pack White ARGB 1-to-3 Splitter Cables 5V 3-Pin 11.8in
Two white 5 V 3-pin ARGB 1-to-3 splitters extend one motherboard header to three addressable RGB fans or LED strips, 11.8 in each
- TypeWhite
- ColorWhite
- Connector Detail3in to Female-to-Female
- Terminal GenderFemale to Female
- Specifications5V 3-Pin Female to Female ARGB Addressable RGB Adapter Cable
- ShieldingWhite
- Connect three ARGB devices from one header with 1-to-3 split design
- Extend reach inside the chassis using 11.8 inch cable length
- Reliable signal transfer through copper conductor cores
- Durable soft PVC jacket protects wiring from dust and damage
- Includes eight 3-pin male plugs for flexible device connections
What this kit contains
Two white 1-to-3 ARGB splitter cables and eight 3-pin male connectors arrive in the pack. Each cable splits a single 5 V 3-pin addressable RGB header into three female ports. The 11.8-inch length suits typical chassis routing. Copper conductors and soft PVC sheathing protect the signal.
When the splitter replaces daisy-chains
The Y-design removes the need to chain devices from one header to the next. Voltage drop across long daisy-chains can dim LEDs; the direct split keeps each run short. Builders adding more than two ARGB fans or LED strips to one header gain the extra ports without adapters. The cables do not work with 4-pin 12 V RGB headers.
Build integration notes
Plug the male end into the motherboard 5 V 3-pin ARGB header, then attach up to three fans or 5050/3528 LED strips per cable. White insulation blends with light-coloured themes. No additional power connector is required; the header supplies 5 V DC. Ensure total current draw stays within the header rating.
Highlights
- Connect three ARGB devices from one header with 1-to-3 split design
- Extend reach inside the chassis using 11.8 inch cable length
- Reliable signal transfer through copper conductor cores
- Durable soft PVC jacket protects wiring from dust and damage
- Includes eight 3-pin male plugs for flexible device connections
Specifications
| Brand | Jstincal |
|---|---|
| Model | Jstincal-ARGB-Fan-Adapter |
| Type | White |
| Color | White |
| Connector Detail | 3in to Female-to-Female |
| Terminal Gender | Female to Female |
| Specifications | 5V 3-Pin Female to Female ARGB Addressable RGB Adapter Cable, White, 11.8 L x 0.4 W x 0.4 H inches |
| Shielding | White |
| Conductor | Copper Conductor |
| Construction | 5V 3-Pin Female to Female ARGB Addressable RGB Adapter Cable |
| Features | 5V 3-Pin Female to Female ARGB Addressable RGB Adapter Cable, White |
| Disclaimer | not_applicable |
Questions about this item
How much clearance do the 11.8in white ARGB splitter cables need inside a chassis?
Each cable measures 11.8 inches long, 0.4 inches wide and 0.4 inches high including connectors, so allow at least that space behind the motherboard tray or along the fan-radiator stack.
Which way round do the 5V 3-pin female headers and the included 3-pin male plugs connect to the motherboard and fans?
Plug the single female end of the Y-cable into the motherboard +5V 3-pin ARGB header, then attach each device to one of the three female branches using the supplied 3-pin male connectors; the keyed notch prevents reverse insertion.
When should the soft PVC jacket or copper conductors be inspected or the cable replaced?
Check the white PVC sleeve and copper cores whenever you rebuild or reroute cables; replace a splitter if the jacket is cracked, pins are bent, or addressable RGB lighting flickers on any connected 5050 or 3528 strip or fan.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115656BTC
In stock
