JONSBO ZA-240BR 240mm case fan 2×120mm ARGB 28mm 700-2400rpm black
- 2 Fans
- Case Fan
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
JONSBO
A single frame holds three 120 mm ARGB fans running 700–1800 RPM with 18.75–47.71 CFM airflow and 16.4–30.7 dB(A) noise, unified PWM and 5 V ARGB control via one motherboard connection
The JONSBO ZB-360WR combines three 120mm fans inside a single white frame measuring 362mm by 123mm by 28mm. Each fan spins between 700 and 1800 RPM and delivers 18.75 to 47.71 CFM at 16.4 to 30.7 dB(A). The unit draws 6.60W for the motors and 6.75W for the 5V ARGB lighting.
Your board must provide a 4-pin PWM header for speed control and a 5V 3-pin ARGB header for lighting. The assembly uses a single combined cable for both functions. Boards limited to 27 addressable LEDs need an external ARGB controller; newer Aura Sync compatible boards work without one. The daisy-chain male and female ARGB plugs allow adding further devices on the same header.
At continuous loads the fans operate across the full 700 to 1800 RPM range, producing 0.33 to 1.66 mmH2O static pressure. The 28mm thick blades maintain the quoted CFM and noise envelope without the short-burst spikes seen on thinner designs. Unified PWM regulation keeps all three rotors synchronised so airflow stays steady during long rendering or gaming sessions.
| Brand | JONSBO |
|---|---|
| Series | ZB SERIES |
| Model | ZB-360WR |
| Fan Size | 120mm |
| LED | ARGB |
| Type | Case Fan |
| RPM | 700-1800rpm(±10%) |
| Air Flow | 18.75-47.71 CFM |
| Noise Level | 16.4-30.7 dB(A) |
| Power Connector | PWM 4PIN ARGB 3PIN |
| Color | White |
| Compatibility | Case |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Fan Thickness | 28mm |
| Air Pressure | 0.33-1.66 mmH2O |
| Dimensions | 362mm(L)*123mm(W)*28mm(H) |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The product is a single 362 mm frame that holds three 120 mm ARGB fans pre-assembled, so no separate fan brackets are required; only a motherboard PWM 4-pin header and a 5 V 3-pin ARGB header are needed for power and lighting.
The ZB-360WR is offered in white with a 28 mm thick frame and infinity-mirror lighting on four sides, making it the intended choice for white or light-coloured chassis aesthetics.
At the maximum 1800 RPM the three fans together move up to 47.71 CFM with a static pressure of 1.66 mmH₂O, while noise stays between 16.4 and 30.7 dB(A) depending on the PWM curve set in the BIOS.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?