We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SATA to USB 3.0 adapter cable with USB Type A male connector and LED indicator

JLvetecgo SKU-SATA001 SATA to USB 3.0 Adapter

SKU CH-HD2F-8X3ZD

Connects 2.5" and 3.5" SATA drives to USB 3.0 at 5 Gbps for data transfer, backup and recovery; 3.5" drives need a separate 12 V power adapter

  • TypeUSB
  • ColorBlack
  • Connector DetailUSB Type A
  • Terminal GenderMale-to-Male
  • Speed5 gigabits_per_second
  • FeaturesData Transfer
  • Connect 3.5" and 2.5" SATA drives to USB 3.0 for storage expansion and data recovery
  • Transfer files at up to 5 Gbps with USB 3.0 speed
  • Hot-swappable plug-and-play operation with no drivers required
  • LED indicator shows power and activity status at a glance
  • 5" drives powered directly from USB; 3.5" drives need a 12 V/2 A adapter via DC jack (5.5 × 2.1 mm)

SATA to USB 3.0 Adapter for HDD and SSD Access

This adapter connects a 2.5 inch or 3.5 inch SATA drive to a USB Type A port on a computer. It suits users who need to retrieve data, clone a drive or add temporary external storage. The cable is hot-swappable and requires no driver installation.

Maximum Transfer Rate of 5 Gbps

The USB 3.0 interface supports data speeds up to 5 Gbps. This figure determines whether the adapter can keep pace with the sequential throughput of the connected solid-state or mechanical drive.

DC-Jack Port for 3.5 Inch Drive Power

A 12 V power adapter with a 5.5 mm by 2.1 mm barrel plug must be supplied separately to run a 3.5 inch hard drive. A 2.5 inch drive draws sufficient power from the USB port alone. An LED indicates power and activity status.

Highlights

  • Connect 3.5" and 2.5" SATA drives to USB 3.0 for storage expansion and data recovery
  • Transfer files at up to 5 Gbps with USB 3.0 speed
  • Hot-swappable plug-and-play operation with no drivers required
  • LED indicator shows power and activity status at a glance
  • 5" drives powered directly from USB; 3.5" drives need a 12 V/2 A adapter via DC jack (5.5 × 2.1 mm)

Specifications

BrandJLvetecgo
ModelSKU-SATA001
TypeUSB
ColorBlack
Connector DetailUSB Type A
Terminal GenderMale-to-Male
Speed5 gigabits_per_second
FeaturesData Transfer

Questions about this item

What does the 5 Gbps speed rating mean when I connect a drive?

It is the maximum interface bandwidth of the USB 3.0 link; real-world transfer rates depend on the drive you attach and the host controller.

Which USB standard does the adapter use and what does it limit?

The adapter uses USB 3.0, capping the connection at 5 Gbps regardless of the drive's own SATA revision.

What do I need to power a 3.5 inch drive with this adapter?

A separate 12 V / 2 A power supply with a 5.5 × 2.1 mm DC plug is required; the adapter only provides a DC jack for it.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.