We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided DisplayPort 2.1 cable, male-to-male connectors, 3.3 ft length

Jansicotek

Jansicotek TJ-A285BK DisplayPort 2.1 cable 3.3 ft 80Gbps 16K@30Hz

SKU CH-T91T-1160Y

A 3.3 ft DisplayPort 2.1 cable rated for 80 Gbps, supporting 16K at 30 Hz, 8K at 120 Hz and 4K at 240 Hz with triple-shielded copper conductors

  • TypeDisplayPort Cable
  • ColorBlack
  • Length3.3 ft.
  • Cable Length3.3 ft.
  • Connector Number1
  • Connect From1 x DisplayPort2.1
  • 80 Gbps bandwidth drives 16K at 30 Hz and 4K at 240 Hz
  • Triple-shielded 28 AWG copper conductor resists EMI for artifact-free video
  • Aluminium shells dissipate heat and survive 15 000 bend cycles
  • Dynamic HDR, HDCP 2.2 and DSC 1.2a enable high-fidelity colour and compression
  • Backward compatible with DisplayPort 1.0 through 2.0 for wide device support

DisplayPort 2.1 cable for high-refresh gaming

This 3.3 ft Jansicotek cable carries a DisplayPort 2.1 link rated at 80 Gbps. It connects a graphics card to a monitor with male-to-male connectors and a triple-shielded, solid-copper construction. The black, braided jacket uses 28 AWG oxygen-free copper conductors and gold-plated contacts for reliable signal integrity.

Sustained 80 Gbps throughput with EMI resistance

The cable maintains full bandwidth across its length without the signal degradation seen in thinner or unshielded leads. Triple shielding and the aluminium shell dissipate heat and reject electromagnetic interference during long sessions. Rated for over 15 000 bend cycles, the construction preserves performance where frequent routing or tight bends would fatigue lesser cables.

16K at 30 Hz maximum resolution decides fit

The link tops out at 16K@30 Hz with DSC, then steps down to 8K@120 Hz, 4K@240 Hz and 2K@360 Hz. Buyers whose display and GPU both support DisplayPort 2.1 and need these refresh rates get the headroom; systems limited to DisplayPort 1.4 or lower cannot reach the advertised resolutions regardless of cable quality.

Highlights

  • 80 Gbps bandwidth drives 16K at 30 Hz and 4K at 240 Hz
  • Triple-shielded 28 AWG copper conductor resists EMI for artifact-free video
  • Aluminium shells dissipate heat and survive 15 000 bend cycles
  • Dynamic HDR, HDCP 2.2 and DSC 1.2a enable high-fidelity colour and compression
  • Backward compatible with DisplayPort 1.0 through 2.0 for wide device support

Specifications

BrandJansicotek
ModelTJ-A285BK
TypeDisplayPort Cable
ColorBlack
Length3.3 ft.
Cable Length3.3 ft.
Connector Number1
Connect From1 x DisplayPort2.1
Connect To1 x DisplayPort2.1
Connector DetailDisplayPort to DisplayPort 2.1 Cable 16K@30Hz
Terminal GenderMale to Male
SpeedTest Value
SpecificationsRefresh Rate: 16K@30Hz, 8K@60/120Hz, 4K@144Hz, 4K@165Hz, 2K@360Hz
Version: DisplayPort 2.1 Cable
Bandwidth: Support up to 80Gbps
Features: Supports HBR3 / HDCP 2.2 / HDCP1.4 / HDR / DPCP 1.0 / DP++ / Stereoscopic 3D video / Multi-stream transport (MST) / DSC
Specifications: FEC Forward Error Correction and maximum 32 audio channels
Backwards Compatible: DisplayPort 2.0 / 1.4 / 1.3 / 1.2 / 1.1 / 1.1a / 1.0
Conductor Material: Tinned Copper
Connector Type: DisplayPort Male to DisplayPort Male
?
16K Displayport Cable will bring you a new visual experience and gaming experience, whether
ShieldingTriple-shielded
ConductorSolid Copper Conductor
Constructiontest123
Refresh Rate16K@30Hz, 8K@60Hz/120Hz, 4K@144Hz, 4K@165Hz, 2K@360Hz
Sound QualityProduction Test
FeaturesDisplayPort cable not only can support 3D video but also can support the resolution up to 16K@30Hz, 8K@60/120Hz and 4K@165Hz, ideal for doing high-performance gaming or watching an HD movie on your television.
?
Designed with tinned copper and triple-layer shielding, the DP Cable is enough to transfer high-quality and stable video and audio signals, no worry about visual and audio glitches, artifacts, and audio/video synchronization problems. urability under heavy usage and multiple plugging and unplugging.
?
Superior Vision with DisplayPort 2.1
DisplayPort 2.1 can transmit up to 80G
Windows VistaWorks with Windows Vista
Disclaimer? 8.19 x 3.7 x 0.63 inches

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the cable get warm or draw noticeable power when driving 8K at 120 Hz all day?

The aluminum shell dissipates heat from the 28AWG OFC conductors, and the passive cable adds no active power draw to your system.

What must my monitor and graphics card already support for the cable to deliver 16K at 30 Hz?

Both ends need DisplayPort 2.1 ports with DSC 1.2a and Dynamic HDR 4:4:4 capability; the cable is backward compatible with DP 2.0, 1.4, 1.3, 1.2, 1.2a, 1.1 and 1.0.

Will this 3.3 ft cable work reliably with my older DP 1.4 monitor running 4K at 144 Hz?

Yes, the triple-shielded 80 Gbps cable is fully backward compatible and supports 4K at 144 Hz, 165 Hz and 240 Hz on legacy DP 1.4 hardware.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.