We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon braided DisplayPort 1.4 cable 10 ft with gold connectors

Jansicotek

Jansicotek TJ-A044 DisplayPort 1.4 cable Nylon Braided 10 ft

SKU CH-0BR9-F5JSS

A 10 ft DisplayPort 1.4 cable rated for 32.4 Gbps bandwidth, supporting 8K at 60 Hz and 4K up to 144 Hz with a nylon-braided jacket and gold-plated connectors

  • TypeDisplayPort Cable
  • ColorBlack
  • Connect From1 x DisplayPort 1.4
  • Connect To1 x DisplayPort 1.4
  • Terminal GenderMale to Male
  • Speedsupports 32.4 Gbps of bandwidth

Cable Length 10 Feet

Struck-through versions exist but are not stocked here.

  • Supports 8K at 60 Hz for ultra-sharp visuals
  • Delivers 32.4 Gbps bandwidth for high-refresh gaming
  • Nylon-braided jacket resists wear over 10 ft runs
  • Gold-plated connectors ensure reliable signal transfer
  • Backward compatible with DP 1.3, 1.2 and 1.1

Jansicotek TJ-A044 DisplayPort 1.4 Cable 10 ft

The Jansicotek TJ-A044 is a male-to-male DisplayPort 1.4 cable measuring 10 ft. It uses 24-30 AWG pure solid copper conductors with 24K gold-plated connectors and a nylon-braided jacket over an aluminium alloy shell. The cable supports 32.4 Gbps bandwidth for high-resolution video and audio transmission between compatible devices.

Suited for 8K 60 Hz and high-refresh 4K gaming

This cable suits users connecting a DisplayPort 1.4 source to a monitor running 8K at 60 Hz, 4K at 144 Hz or 2K at 240 Hz with HDR, DSC 1.2 and variable refresh rates such as FreeSync or G-Sync. It is not for buyers who need a cable longer than 10 ft, an angled connector or a plenum-rated jacket for in-wall installation.

32.4 Gbps HBR3 bandwidth decides compatibility

The single specification that determines whether this is the right part is the 32.4 Gbps HBR3 bandwidth rating. It enables 8K 60 Hz, 4K 144 Hz and 2K 240 Hz signals with Display Stream Compression 1.2 and Forward Error Correction. If your monitor and graphics card require more bandwidth than 32.4 Gbps for their target resolution and refresh rate, this cable will not support that mode.

Highlights

  • Supports 8K at 60 Hz for ultra-sharp visuals
  • Delivers 32.4 Gbps bandwidth for high-refresh gaming
  • Nylon-braided jacket resists wear over 10 ft runs
  • Gold-plated connectors ensure reliable signal transfer
  • Backward compatible with DP 1.3, 1.2 and 1.1

Specifications

BrandJansicotek
ModelTJ-A044
TypeDisplayPort Cable
ColorBlack
Connect From1 x DisplayPort 1.4
Connect To1 x DisplayPort 1.4
Terminal GenderMale to Male
Speedsupports 32.4 Gbps of bandwidth
SpecificationsConnector: DP (Male) To DP (Male)
Connector: 24K Gold Plated
Conductor: 24-30 AWG Pure Solid Copper
Jacket: Nylon Braid & PVC
Shell: Aluminium Alloy
Version: DisplayPort 1.4 , Compatible with DisplayPort 1.2 / 1.1 / 1.0
Refresh-Rate: 8K@60Hz, 4K@144Hz, 2K@165Hz or even 2K@240Hz, according to Lengths
OD: 6.0-8.5 mm, according to Lengths
Supports: 32.4 Gbps bandwidth , HBR3, CEC, EDID, HDCP2.2,HDR10 4:4:4 3D Format,32 audio channels
Refresh Rate8K(7680x4320)@60Hz, 5K(5120x2880)@60Hz, 4K@144Hz, 4K@60Hz, 2K@240Hz, 1080P@240Hz

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I plug the 10 ft Jansicotek TJ-A044 cable in without bending the 24K gold-plated DisplayPort 1.4 connectors?

Align the male DP 1.4 plug with the port notch, push straight in until the latch clicks, then route the nylon-braided jacket so the aluminium-alloy shell stays straight — the step people miss is forcing the cable sideways before the latch engages.

Will the 24-30 AWG pure solid copper conductors or the nylon braid need replacing after heavy 8K@60Hz use?

The conductors and braid are rated for the full 32.4 Gbps HBR3 bandwidth; no scheduled replacement is required unless the jacket is cut or a connector latch breaks.

At what point does the 10 ft length limit 4K@240Hz or 8K@60Hz signal integrity on this DP 1.4 cable?

The cable is VESA certified for 32.4 Gbps HBR3 across the full 10 ft, so 4K@240Hz and 8K@60Hz remain within spec; the first limit would be exceeding the 32.4 Gbps bandwidth ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.