We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black SATA cables with straight 180-degree locking connectors, 18 inches long

Jansicotek

Jansicotek SATA III 3-pack 6 Gbps straight 180° locking 18 in cable

SKU CH-V2V4-Y44V3

Three-pack of SATA III data cables with straight locking connectors, 18 inches long, supporting up to 6 Gbps transfer rates

  • ColorBlack
  • 6 Gbps data rate ready with SATA 3.0 support
  • Three cables in one pack for spares or RAID builds
  • Straight 180° connectors with locking latches prevent accidental disconnects
  • 18 in length suits typical desktop drive bays
  • Backward compatible with SATA I and II drives

Three-pack SATA III data cables

This set contains three 18-inch SATA III cables with straight 180-degree connectors and locking latches. They link internal Serial ATA hard drives, SSDs and optical drives to motherboards or host controllers. Each cable handles the data path only; drives must receive power separately. The black cables are sold new in a cost-effective triple pack.

Builders adding multiple drives

The three-cable bundle suits anyone installing several SATA storage devices or building a RAID array who wants matching cables with secure latching connectors. It is not for users who need angled plugs for tight clearance, right-angle connectors for stacked ports, or cables that also carry power to the drive. Buyers requiring longer runs or different connector orientations should look elsewhere.

6 Gbps SATA Revision 3.0 interface

The decisive specification is the SATA 3.0 interface rated for up to 6 Gbps data transfer, backward compatible with SATA I and II devices. Actual throughput depends on the connected drive and controller capabilities. This single interface rating determines whether the cable matches the performance level of the storage hardware being installed.

Highlights

  • 6 Gbps data rate ready with SATA 3.0 support
  • Three cables in one pack for spares or RAID builds
  • Straight 180° connectors with locking latches prevent accidental disconnects
  • 18 in length suits typical desktop drive bays
  • Backward compatible with SATA I and II drives

Specifications

ColorBlack

Questions about this item

How do I install the 180-degree straight SATA cables so the locking latches actually engage?

Align each straight connector with the motherboard and drive ports, push straight in until the latch clicks, then pull gently to confirm it is locked; the 180-degree orientation means the cable runs parallel to the board, so route it before seating the second end.

What maintenance or replacement will the three-pack of SATA III cables need over time?

The cables are passive with no moving parts beyond the latches; inspect the latch tabs if a drive is swapped repeatedly — replace any cable whose latch no longer clicks securely.

What limit appears first during sustained transfers with these 6 Gbps SATA cables?

The practical ceiling is the 6 Gbps SATA 3.0 interface itself; actual throughput will be lower and is capped by the slowest connected drive or controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.