We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RJ45 splitter with two female ports and a .75 m USB power cable

Jansicotek

Jansicotek RJ45 1-to-2 Network Splitter Adapter with USB Power Cable 0.75m

SKU CH-6HTF-1EG44

Splits one RJ45 Ethernet cable into two 100 Mbps connections with a 0.75 m USB power cable and gold-plated pins

  • Type1 to 2 RJ45 Network Splitter Adapter
  • Package Contents1 X RJ45 Network Splitter Adapter
  • Splits one RJ45 port into two female sockets
  • USB power cable of .75 m enables simultaneous dual-device use
  • Gold-plated pins and OFC contacts resist corrosion
  • Each output delivers up to 100 Mbps while input supports 1000 Mbps
  • Compact ABS housing works with Cat5 through Cat7 cables

What this adapter does

The Jansicotek RJ45 splitter turns one Ethernet port into two female RJ45 sockets so two devices can share a single wired connection. A 0.75 m USB cable supplies the power required for simultaneous operation. It accepts Cat5, Cat5e, Cat6 and Cat7 cables and fits routers, switches, PCs, TVs and set-top boxes.

Speed limits and signal behaviour

Each of the two output ports delivers up to 100 Mbps while the combined input handles up to 1000 Mbps. The two cable groups operate independently so traffic on one does not interfere with the other. Gold-plated pins and oxygen-free copper contacts maintain a corrosion-free link.

What the bundled USB cable enables

The included 0.75 m USB power cable is mandatory for running both ports at the same time; without it the adapter cannot split the signal for two active devices. The PVC shell keeps the unit light and compact for portable use. No driver installation or configuration software is required.

Highlights

  • Splits one RJ45 port into two female sockets
  • USB power cable of .75 m enables simultaneous dual-device use
  • Gold-plated pins and OFC contacts resist corrosion
  • Each output delivers up to 100 Mbps while input supports 1000 Mbps
  • Compact ABS housing works with Cat5 through Cat7 cables

Specifications

Type1 to 2 RJ45 Network Splitter Adapter
Package Contents1 X RJ45 Network Splitter Adapter

Questions about this item

How do I connect the USB power cable and the two Ethernet cables so both computers share the line?

Plug the incoming network cable into the single RJ45 port, connect the two outgoing cables to the two female ports, then insert the USB power cable into any USB port to activate the splitter for simultaneous use.

What part of the adapter is most likely to wear out and need replacement after extended use?

The gold-plated RJ45 pins and the retaining clips on the female ports can lose spring tension or oxidise over time, eventually requiring a new splitter.

At what throughput does each connected device max out during continuous heavy traffic?

Each output is limited to 100 Mbps, so sustained transfers on either device will hit that ceiling while the combined input can handle up to 1000 Mbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.