Jansicotek
Jansicotek OZHW3 RJ45 1-to-2 Ethernet Splitter 1000Mbps USB Powered
Splits one RJ45 port into two simultaneous 1000 Mbps connections with USB power
- TypeEthernet Splitter 1 to 2 RJ45 Network Adapter
- Changer TypeGigabit RJ45 Ethernet Splitter 1 to 2
- SpecificationsImportant Note: This Gigabit RJ45 Ethernet Splitter equipped
- Connector StyleRJ45
- FeaturesExpand your network and add network devices with this 2-port
- Dimensions4.02 x 3.74 x 1.06 inches
- Gigabit speeds up to 1000 Mbps per port for fast data transfer
- Two RJ45 female ports let two devices share one Ethernet line simultaneously
- USB powered with included 80 cm cable for stable operation
- Gold-plated contacts and solid PCB ensure reliable signal transmission
- Compact 4.02 x 3.74 x 1.06 inch design fits tight spaces
Splitter for two devices sharing one line
The Jansicotek OZHW3 is a one-to-two RJ45 Ethernet splitter that lets two network devices share a single cable run. It is built for homes or small offices where extra wall ports are unavailable and running new cabling is impractical. The adapter requires the included USB power cable to operate and cannot function without an active power connection.
Sustained gigabit throughput on each port
Under continuous load each of the two female ports delivers up to 1000 Mbps and the signals remain isolated so they do not interfere with each other. The physical tapping method divides the available bandwidth rather than switching it, so total throughput is shared between the connected devices. IPTV signals are not supported and the splitter does not assign IP addresses.
Plug-and-play with mandatory USB power
Installation is a simple matter of connecting the incoming cable, plugging in the two outgoing cables, and attaching the 80 cm USB lead to a stable power source. The gold-plated pins and shielded PCB ensure reliable contact, but forgetting the USB power is the most common reason the link fails to come up. No software configuration is required.
Highlights
- Gigabit speeds up to 1000 Mbps per port for fast data transfer
- Two RJ45 female ports let two devices share one Ethernet line simultaneously
- USB powered with included 80 cm cable for stable operation
- Gold-plated contacts and solid PCB ensure reliable signal transmission
- Compact 4.02 x 3.74 x 1.06 inch design fits tight spaces
Specifications
| Brand | Jansicotek |
|---|---|
| Model | OZHW3 |
| Type | Ethernet Splitter 1 to 2 RJ45 Network Adapter |
| Changer Type | Gigabit RJ45 Ethernet Splitter 1 to 2 |
| Specifications | Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection. Ethernet Splitter 1 to 2: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously. 1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 2 ways dua |
| Connector Style | RJ45 |
| Features | Expand your network and add network devices with this 2-port 1000mbps router/ rj45 network switch splitter, letting you transfer 10 times faster than Fast Ethernet. Two ports offer 2X Ethernet so you can plug and play without missing a beat. 2-port Gigabit Ethernet Splitter: Provides a wired network connection for 2 devices simultaneously by means of one single Ethernet line. 10/100/1000 Mbps speed: Ethernet Lan splitter high speed for efficient performance. Superior Construction for Reliability and Safety: Metal shell, hard and wear-resistant, heat-resistant, flame-resistant; Copper |
| Dimensions | 4.02 x 3.74 x 1.06 inches |
| Weight | 3.2 ounces |
| Package Contents | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
Questions about this item
Does the USB-powered RJ45 splitter generate noticeable heat or noise during all-day use?
The Jansicotek OZHW3 has no fan or moving parts, so it runs silently; the gold-plated pins and thick PCB keep temperatures low during continuous gigabit operation.
What must I already own to make this 1-to-2 adapter work?
You need one incoming Cat5e or better Ethernet cable, two outgoing Cat5e–Cat8 patch cords, and a USB-A power source such as a wall charger or router USB port — the included 80 cm cable plugs into that source.
Will this splitter work alongside my older Cat5 wiring and 100 Mbps devices?
Yes, the RJ45 ports are backward-compatible with Cat5 and 10/100 equipment; each port simply negotiates the highest speed the connected cable and device support, up to 1000 Mbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114821BTC
In stock
