Jansicotek
Jansicotek OZHW2 Gigabit Ethernet Splitter 1 to 3 with USB Power Cable
Splits one Ethernet cable into three 1000 Mbps ports powered by an 80 cm USB cable
- TypeEthernet Splitter 1 to 3 RJ45 Network Adapter
- Changer TypeGigabit RJ45 Ethernet Splitter 1 to 3
- SpecificationsImportant Note: This Gigabit RJ45 Ethernet Splitter equipped
- Connector StyleRJ45
- FeaturesExpand your network and add network devices with this 3-port
- Dimensions4.02 x 3.74 x 1.06 inches
- Share one Ethernet line across three devices simultaneously with included USB power cable
- Achieve up to 1000 Mbps throughput per cable set without signal crosstalk
- Works with Cat5 through Cat8 cables for ADSL, switches, routers, TVs and computers
- Plug-and-play design needs no software setup, just connect the 80 cm USB cable for power
- Compact aluminium housing measures 4.02 x 3.74 x 1.06 inches and weighs 3.2 ounces
Gigabit RJ45 Ethernet Splitter 1 to 3
The Jansicotek OZHW2 splits a single Ethernet line into three RJ45 ports so three devices can share one wired connection at the same time. It draws power from an included USB cable and supports Cat5 through Cat8 cabling. This suits home or small-office setups that need extra wired ports without running new cables.
Upgrade from a single-port wall jack
When a room only has one Ethernet drop, this splitter turns it into three active ports for computers, TVs, set-top boxes or switches. The jump is worth it if you need simultaneous 1000 Mbps throughput on each port and cannot install a full switch or pull additional wiring. It will not help buyers who want more total bandwidth than the upstream link provides.
Plug-and-play with USB power
Connect the USB cable to a 5 V socket or adapter, link the incoming cable to the input port, then plug up to three devices into the outputs. No driver or configuration is required. The unit cannot operate without the USB power connection, so a missing or loose cable is the most common reason it appears dead on arrival. The 80 cm cord limits placement to within 2.6 ft of a USB power source.
Highlights
- Share one Ethernet line across three devices simultaneously with included USB power cable
- Achieve up to 1000 Mbps throughput per cable set without signal crosstalk
- Works with Cat5 through Cat8 cables for ADSL, switches, routers, TVs and computers
- Plug-and-play design needs no software setup, just connect the 80 cm USB cable for power
- Compact aluminium housing measures 4.02 x 3.74 x 1.06 inches and weighs 3.2 ounces
Specifications
| Brand | Jansicotek |
|---|---|
| Model | OZHW2 |
| Type | Ethernet Splitter 1 to 3 RJ45 Network Adapter |
| Changer Type | Gigabit RJ45 Ethernet Splitter 1 to 3 |
| Specifications | Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection. Ethernet Splitter 1 to 3: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously. 1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 3 ways dua |
| Connector Style | RJ45 |
| Features | Expand your network and add network devices with this 3-port 1000mbps router/ rj45 network switch splitter, letting you transfer 10 times faster than Fast Ethernet. Three ports offer 2X Ethernet so you can plug and play without missing a beat. 3-port Gigabit Ethernet Splitter: Provides a wired network connection for 2 devices simultaneously by means of one single Ethernet line. 10/100/1000 Mbps speed: Ethernet Lan splitter high speed for efficient performance. Superior Construction for Reliability and Safety: Metal shell, hard and wear-resistant, heat-resistant, flame-resistant; Copp |
| Dimensions | 4.02 x 3.74 x 1.06 inches |
| Weight | 3.2 ounces |
| Package Contents | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
Questions about this item
How much clearance does the 4.02 x 3.74 x 1.06 inch splitter need behind a desk or panel?
The aluminium housing measures 4.02 by 3.74 by 1.06 inches, so allow at least that depth plus the 80 cm USB cable bend radius for a tidy installation.
The 80 cm USB power cable must be plugged in before any network cables — what happens if I skip that step?
The splitter cannot operate without the USB power connection; connect the 80 cm cable to a stable 5 V source first, then attach the three RJ45 patch cords.
Does the RJ45 splitter require any firmware updates or fan cleaning over time?
No firmware or moving parts exist; just keep the aluminium vents free of dust and reseat the RJ45 plugs if a link drops.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115599BTC
In stock
