We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White HDMI-to-VGA adapter cable, ten feet long, male HDMI to female VGA

Jansicotek

Jansicotek HDMI to VGA Adapter Converter 1080p White 10 ft

SKU CH-Z19W-GNMTB

Converts HDMI sources to VGA displays at up to 1080p resolution with a 10 ft cable

  • ColorWhite
  • Cable Length10 ft.
  • Connect HDMI devices to VGA displays with 10 ft cable
  • Supports 1920x1080@60Hz Full HD resolution for clear video
  • Built-in IC chip converts digital HDMI to analog VGA signal
  • Gold-plated HDMI connector resists corrosion for reliable signal transmission
  • Plug-and-play installation works with laptops, Raspberry Pi, consoles

HDMI to VGA adapter for legacy displays

The Jansicotek adapter converts a digital HDMI output to an analogue VGA input so you can connect modern laptops, ultrabooks, Chromebooks, Raspberry Pi units or game consoles to older monitors, projectors or TVs. It is a one-way male HDMI to female VGA device that requires a separate VGA cable and draws power from the source port. No audio is transmitted through this converter.

Upgrade from missing or broken VGA ports

This adapter replaces a native VGA output on devices that only provide HDMI, letting you keep using existing VGA displays without replacing them. The jump is worth it when a projector or monitor lacks HDMI and you need a simple plug-and-play link for presentations, extended desktops or retro gaming on legacy screens. It does not work in reverse from VGA sources to HDMI displays.

1080p60 headroom with listed resolution steps

The converter handles 1920x1080 at 60 Hz plus 1600x1200, 1280x1024, 1280x720, 1024x768, 800x600, 768x576 and 640x480. Gold-plated HDMI contacts and a moulded strain relief protect the 10 ft cable during frequent connects. It runs out at resolutions above 1080p, on devices that demand active audio over HDMI, or when a bi-directional signal path is required.

Highlights

  • Connect HDMI devices to VGA displays with 10 ft cable
  • Supports 1920x1080@60Hz Full HD resolution for clear video
  • Built-in IC chip converts digital HDMI to analog VGA signal
  • Gold-plated HDMI connector resists corrosion for reliable signal transmission
  • Plug-and-play installation works with laptops, Raspberry Pi, consoles

Specifications

ColorWhite
Cable Length10 ft.

Questions about this item

How much clearance does the 10 ft adapter need behind the HDMI port?

The compact adapter plugs directly into the HDMI male port and requires only the depth of the connector itself; route the 10 ft cable so the VGA female end reaches your display without tension.

What is the correct order to connect the HDMI male and VGA female ends for plug-and-play installation?

Insert the HDMI male end into the source device first, then attach your VGA cable to the VGA female port on the adapter; the built-in IC chip activates automatically with no driver required.

Will the gold-plated HDMI connector need cleaning or replacement to maintain 1080p at 60 Hz?

Gold plating resists corrosion, so the connector does not require routine cleaning; if signal degrades, inspect the VGA cable and display port first, as the adapter itself has no user-serviceable parts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.