We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular box with three HDMI ports on one side, one HDMI output on the other, USB-C power and IR ports

Jansicotek

Jansicotek HDMI Switch 3 Port 8K 60Hz 4K 120Hz 48Gbps Black Remote

SKU CH-ZVPX-DFDCX

Connects three HDMI sources to one display with 8K 60 Hz, 4K 120 Hz and 48 Gbps bandwidth, switched by remote or button

  • TypeHDMI Switchers
  • Changer TypeHDMI Switch/Extender
  • ColorBlack
  • Ports3
  • Connect three sources to one display without cable swapping
  • Supports 8K at 60 Hz and 4K at 120 Hz for high-refresh gaming
  • 48 Gbps bandwidth preserves lossless video and audio quality
  • Switch instantly via remote up to 15 feet or front-panel button
  • Red LED shows the active input at a glance

Three-input HDMI 2.1 switch

This Jansicotek switch routes three HDMI 2.1 sources to a single display. It supports 8K at 60 Hz, 4K at 120 Hz and 1080p at 240 Hz with 48 Gbps bandwidth. The unit handles HDR10, HDR10+, Dolby Vision and VRR for gaming consoles, PCs and streaming devices. A compact black enclosure measures 7 by 5.7 by 1.2 inches and weighs 185 g.

Check cables and power before ordering

Each input requires an HDMI 2.1 cable no longer than 1.5 metres for full 48 Gbps performance. The switch draws 5 V at 1 A through a USB-C port, so a suitable power adapter must be available. Verify that your source devices and display support HDMI 2.1, HDCP 2.3 and the desired resolution and refresh rate. An IR receiver with a 3.5 mm jack is included for remote operation.

Passive cooling runs silent

The metal housing dissipates heat without fans, so operation is completely silent. Power draw stays at 5 V 1 A during normal switching and signal transmission. LED indicators show the active input without adding measurable heat. The IR remote works up to 15 feet for convenient source changes.

Highlights

  • Connect three sources to one display without cable swapping
  • Supports 8K at 60 Hz and 4K at 120 Hz for high-refresh gaming
  • 48 Gbps bandwidth preserves lossless video and audio quality
  • Switch instantly via remote up to 15 feet or front-panel button
  • Red LED shows the active input at a glance

Specifications

TypeHDMI Switchers
Changer TypeHDMI Switch/Extender
ColorBlack
Ports3

Questions about this item

What comes in the box and do I need to buy any cables or a power adapter separately?

The box contains the 3-port HDMI switch, an IR remote control, and a 5 V 1 A power supply. You still need to provide three HDMI 2.1 cables for the sources and one for the display.

There is only one model listed — how do I know it will handle my 8K 60 Hz and 4K 120 Hz sources?

This single model supports 8K at 60 Hz, 4K at 120 Hz, 1080p at 240 Hz, 48 Gbps bandwidth, HDCP 2.3, HDR10, HDR10+, Dolby Vision, VRR and 36-bit deep colour.

Will the 48 Gbps rating actually deliver 8K 60 Hz HDR to my TV without dropouts?

Yes — the switch is rated for 48 Gbps per port and the manufacturer recommends using HDMI 2.1 cables no longer than 1.5 m to maintain full 8K 60 Hz HDR signal integrity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.