Jansicotek
Jansicotek HDMI 2.1 Switch 3×1 48 Gbps 8K 60 Hz 4K 120 Hz
Aluminium-shell HDMI 2.1 switch routes three sources to one display at up to 8K 60 Hz or 4K 120 Hz with 48 Gbps bandwidth
- TypeHDMI Switchers
- Ports3
- Input Connector3XHDMI2.1
- Output Connector1XHDMI2.1
- Maximum Resolutions8K@60Hz 4K@120Hz
- BandwidthHigh Speed 48Gbps
- Connect three sources to one display with a single button press
- Aluminium shell keeps all ports on one side for a tidier desk
- LED indicator shows the active input at a glance
- 48 Gbps bandwidth delivers 8K at 60 Hz and 4K at 120 Hz
- Supports Dynamic HDR, eARC and HDCP 2.2 and 2.3 for cinema-quality audio and video
Three-source HDMI 2.1 switch
This Jansicotek switch routes three HDMI 2.1 sources to a single display. It suits owners of a PS5, Xbox Series X, Apple TV, Blu-ray player or similar gear who need to share one 8K or high-refresh 4K screen without swapping cables. The push-button on the front cycles inputs and an LED shows which port is active. The unit is unidirectional, so it cannot send one source to three displays.
Passive operation with optional power
The switch draws minimal power from the connected sources and runs silently with no fan. An external USB power input is provided for situations where source devices cannot supply enough current for stable 48 Gbps signalling. When powered, the aluminium shell stays cool during extended 8K 60 Hz or 4K 120 Hz sessions. No audible noise is produced in normal use.
Aluminium shell and side-facing ports
The metal enclosure acts as a heatscreen and resists fingerprints better than plastic. All three inputs and the single output sit on the same edge, keeping cables running in one direction for a tidier desk or AV rack. HDCP 2.2 and 2.3 compliance lets protected 8K and 4K content pass through. The package includes only the switch itself; cables are not supplied.
Highlights
- Connect three sources to one display with a single button press
- Aluminium shell keeps all ports on one side for a tidier desk
- LED indicator shows the active input at a glance
- 48 Gbps bandwidth delivers 8K at 60 Hz and 4K at 120 Hz
- Supports Dynamic HDR, eARC and HDCP 2.2 and 2.3 for cinema-quality audio and video
Specifications
| Type | HDMI Switchers |
|---|---|
| Ports | 3 |
| Input Connector | 3XHDMI2.1 |
| Output Connector | 1XHDMI2.1 |
| Maximum Resolutions | 8K@60Hz 4K@120Hz |
| Bandwidth | High Speed 48Gbps |
| Package Contents | 1X Directional HDMI 8K 3 In 1 Out Switch |
Questions about this item
How do I install the Jansicotek HDMI 2.1 switch and what is the common mistake?
Connect up to three source devices to the three HDMI 2.1 inputs and the display to the single HDMI 2.1 output. The common mistake is trying to use it in reverse — one source to three displays — but this unit is unidirectional 3 in 1 out only.
What maintenance or replacement will the Jansicotek HDMI 2.1 switch need later?
No scheduled maintenance is required. If an HDMI 2.1 cable degrades or fails to pass 48 Gbps for 8K 60 Hz or 4K 120 Hz, replace that cable with a certified Ultra High Speed HDMI cable.
What limit appears first during sustained 8K 60 Hz or 4K 120 Hz use?
The 48 Gbps bandwidth ceiling. If the combined video and audio data rate exceeds 48 Gbps, the link will drop frames or fall back to a lower resolution or refresh rate.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114537BTC
In stock
