We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black fiber optic DisplayPort cable 33 ft with slim connectors

Jansicotek

Jansicotek Fiber Optic DisplayPort 1.4 Cable 33 ft

SKU CH-KJHD-YYV20

A 33 ft fiber-optic DisplayPort 1.4 cable delivering 32.4 Gbps bandwidth for 8K at 60 Hz or 4K at 144 Hz over long distances without signal loss

  • ColorBlack
  • Cable Length33 ft.

Cable Length 33 Feet

  • Supports 8K at 60 Hz with 32.4 Gbps bandwidth
  • Delivers 4K at 144 Hz for smooth gaming
  • Fibre-optic design enables lossless signal over 33 ft
  • Unidirectional connectors ensure correct source-to-display installation
  • Compatible with DisplayPort 1.2 and 1.4 devices

Long-distance 8K DisplayPort cable

This 33 ft fiber optic DisplayPort 1.4 cable carries 32.4 Gbps bandwidth for 8K@60Hz or 4K@144Hz resolution. It uses four-core optical fibre to deliver lossless, zero-delay signal transmission up to 100 metres. The cable suits home theatre, gaming, office and VR setups needing ultra-high-definition video over long runs.

Directional plug orientation required

The cable transmits in one direction only: the connector marked "Source" plugs into the computer or laptop, while the "Display" end connects to the monitor, TV or projector. Reversing the ends will produce no image. The slim, flexible jacket eases routing, but the fixed orientation must be observed during installation.

Verify source and display capabilities

Before ordering, confirm that your graphics card or laptop DisplayPort output and your monitor both support the target resolution and refresh rate such as 8K@60Hz or 4K@144Hz. The cable itself is compatible with DisplayPort 1.2 and 1.4 standards, but the linked devices must provide matching performance.

Highlights

  • Supports 8K at 60 Hz with 32.4 Gbps bandwidth
  • Delivers 4K at 144 Hz for smooth gaming
  • Fibre-optic design enables lossless signal over 33 ft
  • Unidirectional connectors ensure correct source-to-display installation
  • Compatible with DisplayPort 1.2 and 1.4 devices

Specifications

ColorBlack
Cable Length33 ft.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I verify the 33 ft cable is delivering 8K at 60 Hz after connecting it?

Check your GPU control panel or monitor OSD to confirm 7680×4320 at 60 Hz appears; the link must show DisplayPort 1.4 with 32.4 Gbps bandwidth and no signal dropouts.

What comes in the box and do I need any extra adapters?

The box contains the fibre-optic DisplayPort-to-DisplayPort cable only; no separate power adapters or converters are required because the optical engine draws power from the DisplayPort source port.

Should I choose this 33 ft version or a different length for a 100 m run?

This model is 33 ft; the specification notes the fibre design supports up to 100 m, so for runs longer than 33 ft you would need a longer cable of the same series.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.