We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek Digital to Analog Audio Converter Bluetooth 5.0 192KHz USB Optical to RCA 3.5mm

SKU CH-QTZD-K628J

Converts Bluetooth 5.0, USB and optical digital audio to stereo RCA and 3.5mm analogue outputs at up to 192KHz/24bit with volume knob and remote

  • TypeDigital to Analog Audio Converter
  • Connector A1 x SPDIF & USB & Bluetooth Receiver Input
  • Connector B1 x L/R RCA & 3.5mm Audio Jack Output
  • AudioYes
  • Package Contents1 x Digital to analog audio converter 1 x USB power cable 1
  • Bluetooth 5.0 streams audio wirelessly to your amplifier
  • USB and optical inputs handle PCM and LPCM at up to 192 kHz 24-bit
  • Simultaneous RCA and 3.5 mm outputs drive speakers and headphones together
  • Built-in headphone amp delivers 125 mW per channel into 32 Ω
  • Volume knob and IR remote give instant level control from the sofa

Digital Audio Converter with Bluetooth 5.0

This Jansicotek unit converts optical SPDIF, USB flash drive, or Bluetooth 5.0 digital sources into analog stereo output through RCA and 3.5 mm jacks. It targets listeners who want to connect modern digital devices to older amplifiers or powered speakers without a built-in DAC. The converter handles PCM and LPCM formats at sampling rates of 32, 44.1, 48, 96 and 192 kHz with 24-bit depth.

Installation and Common Issues

Power the converter via the included USB cable, select the active input, then adjust the volume knob or remote for level control. Optical and USB inputs accept only PCM or LPCM streams; compressed formats such as Dolby Digital or DTS will not decode and produce silence or noise. Bluetooth pairing follows standard device discovery, but multipoint connection is not supported.

Deciding Specification — Headphone Amplifier Power

The built-in headphone stage delivers 125 mW per channel into 32 ohms and supports loads from 16 to 300 ohms. This output level determines whether the converter can drive your headphones to sufficient volume without an external amplifier. If your headphones require significantly more power, this unit will not meet that need.

Highlights

  • Bluetooth 5.0 streams audio wirelessly to your amplifier
  • USB and optical inputs handle PCM and LPCM at up to 192 kHz 24-bit
  • Simultaneous RCA and 3.5 mm outputs drive speakers and headphones together
  • Built-in headphone amp delivers 125 mW per channel into 32 Ω
  • Volume knob and IR remote give instant level control from the sofa

Specifications

TypeDigital to Analog Audio Converter
Connector A1 x SPDIF & USB & Bluetooth Receiver Input
Connector B1 x L/R RCA & 3.5mm Audio Jack Output
AudioYes
Package Contents1 x Digital to analog audio converter
1 x USB power cable
1 x IR Remote Control
1 x User Manual

Questions about this item

How do I know the 192KHz DAC is working after connecting my TV via optical?

Play audio and confirm sound comes from both the RCA and 3.5mm outputs at the same time; the front-panel volume knob should change the level on both.

What comes in the box and what cables do I still need to buy?

The package includes the converter, a USB power cable, an IR remote and a manual; you must supply your own optical Toslink cable and RCA or 3.5mm interconnects.

Which input should I choose — Bluetooth 5.0, USB or optical — for 192KHz 24-bit playback?

Use the optical Toslink input; it accepts PCM/LPCM at 32, 44.1, 48, 96 and 192KHz. USB and Bluetooth are limited to lower rates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.