We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black HDMI 2.1 switch box with five input ports and one output port

Jansicotek

Jansicotek 5x1 HDMI 2.1 video switch 8K@60Hz 4K@120Hz 48Gbps

SKU CH-R6Z1-YG73G

Connects five HDMI 2.1 sources to one display at 8K 60Hz, 4K 120Hz, 48Gbps with HDR10, HDCP 2.3 and 3D support via remote or button

  • TypeHDMI Switchers
  • Changer TypeHDMI Switch/Extender
  • ColorBlack
  • Ports5
  • Connect five sources to one display with the included IR remote
  • Experience 8K resolution at 60 Hz and 4K at 120 Hz for ultra-smooth visuals
  • 48 Gbps bandwidth carries HDR10+ and Dolby Vision without compression
  • Backward compatible with HDMI 2.1, 2.3 and earlier standards for broad device support
  • Switch instantly via remote or the front-panel button for zero-lag source changes

5x1 HDMI 2.1 switch for multi-source setups

This Jansicotek switch connects five HDMI source devices to a single display, letting you select between them with an IR remote or the front-panel button. It is suited for home cinema, office or meeting-room installations where several players, consoles or computers share one screen. The unit is not a splitter and cannot send one source to multiple displays.

Passive operation with 48 Gbps bandwidth

The switch draws power from the connected HDMI sources and adds no active cooling, so it runs silently. It passes video signals up to 48 Gbps, supporting 8K at 60 Hz and 4K at 120 Hz without signal degradation when used with compliant cables. HDCP 2.3 and HDR10+ metadata are transmitted unchanged.

IR remote and manual button included

The bundled infrared remote lets you change inputs from across the room, while the tactile switch on the chassis provides a local fallback. No driver installation or configuration software is required; the device is operational immediately after the HDMI cables are connected.

Highlights

  • Connect five sources to one display with the included IR remote
  • Experience 8K resolution at 60 Hz and 4K at 120 Hz for ultra-smooth visuals
  • 48 Gbps bandwidth carries HDR10+ and Dolby Vision without compression
  • Backward compatible with HDMI 2.1, 2.3 and earlier standards for broad device support
  • Switch instantly via remote or the front-panel button for zero-lag source changes

Specifications

TypeHDMI Switchers
Changer TypeHDMI Switch/Extender
ColorBlack
Ports5

Questions about this item

How do I install the Jansicotek 5x1 HDMI 2.1 switch and what step do people often miss?

Connect up to five HDMI sources to the five input ports and one display to the single output port, then power the unit via its USB power cable. The step often missed is using certified HDMI 2.1 cables no longer than 10 ft for 4K@120Hz or 8K@60Hz signals.

What maintenance or replacement will the Jansicotek 5x1 HDMI 2.1 switch need later?

The switch itself has no user-serviceable parts. Maintenance is limited to keeping vents clear and replacing any HDMI cables that degrade over time. The IR remote uses a standard coin cell battery that will need occasional replacement.

What limit appears first on the Jansicotek 5x1 HDMI 2.1 switch during sustained 8K@60Hz or 4K@120Hz use?

The 48 Gbps bandwidth ceiling is the first hard limit. If total signal demand exceeds this — for example, multiple high-refresh HDR sources — the switch will drop to a lower resolution or refresh rate to stay within the 48 Gbps pipe.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.