Jansicotek
Jansicotek 4x3 VGA Switch Black 1920x1440 IR Remote
A 4×3 VGA switch that routes four sources to three mirrored displays up to 1920×1440 with IR remote control
- ColorBlack
- Ports4
- Maximum Resolutions1920 x 1080
- Distribute one source to three displays simultaneously
- Supports 1920 x 1440 resolution for sharp image quality
- 250 MHz bandwidth ensures clear video transmission
- Front-panel buttons and IR remote for easy switching
- Plug-and-play setup with no drivers required
4×3 VGA Switch for Multi-Display Setups
The Jansicotek 4×3 VGA switch routes video from four source devices to three monitors or projectors simultaneously. It duplicates the same image across all outputs rather than extending the desktop. The unit supports resolutions up to 1920×1440 and a video bandwidth of 250 MHz. A 5 V power adapter is included for reliable operation.
Suits classrooms and signage.
This switch is designed for environments such as classrooms, trade shows or digital signage where identical content must appear on several screens. It does not support independent extended desktops, so users who need separate workspaces on each monitor should look elsewhere. Gamers or creators requiring high refresh rates beyond the stated bandwidth will also need a different solution.
Check VGA ports and cable lengths before ordering
Verify that each source and each display provides a standard VGA connector. The supplier notes reliable transmission up to 65 ft with standard cables, with 10 m recommended for both input and output runs. Ensure the 5 V adapter can reach a mains socket at the installation point. No drivers are required, but all three output displays should share the same native resolution for best results.
Highlights
- Distribute one source to three displays simultaneously
- Supports 1920 x 1440 resolution for sharp image quality
- 250 MHz bandwidth ensures clear video transmission
- Front-panel buttons and IR remote for easy switching
- Plug-and-play setup with no drivers required
Specifications
| Color | Black |
|---|---|
| Ports | 4 |
| Maximum Resolutions | 1920 x 1080 |
Questions about this item
Which VGA sources do I already need to connect the four inputs?
You need up to four VGA-capable sources such as laptops, desktop PCs, TV boxes, Blu-ray players or game consoles, each with a standard VGA output port.
Will my existing VGA monitors or projectors work with the three outputs?
Yes — the three outputs accept any standard VGA display or projector, and the unit auto-detects DDC information to set the best resolution up to 1920 x 1440.
How can I confirm the switch is duplicating the signal to all three screens correctly?
After connecting the 5 V power adapter and selecting an input via the front button or IR remote, all three attached displays should show an identical mirrored image with no flash or lag.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
