Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Jansicotek
Extracts audio from 4K HDMI sources to optical SPDIF and RCA stereo outputs while passing video through to a display
The Jansicotek 4K HDMI Audio Extractor Splitter takes a single HDMI input and provides simultaneous HDMI video pass-through plus optical Toslink SPDIF and RCA L/R stereo analogue audio outputs. It is intended for users who need to separate audio from a source such as a Blu-ray player, games console or streaming stick and send it to an amplifier, soundbar or speaker system while keeping the video signal intact for a TV, monitor or projector.
The unit ships with a 5 V DC power adapter and draws its operating power from that supply rather than from the HDMI source. In normal use it simply de-embeds the audio stream and forwards the video without adding active cooling, so there is no fan noise and no measurable thermal load on the source device. The splitter supports HDMI 1.4b and HDCP 1.4 signalling while maintaining the original video timing.
Under continuous operation the extractor maintains video resolutions up to 4K at 30 Hz with 36-bit deep colour and 3D support, passing the signal through to the HDMI output without degradation. Audio formats including DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC3 and DSD are transmitted over the optical and analogue outputs according to the selected PASS, 2.0CH or 5.1CH mode. The device does not support ARC functionality.
| Type | Audio Splitters |
|---|---|
| Audio | Yes |
| Package Contents | 1x 4K HDMI Audio Extractor Converter 1x 5V Power Adapter 1x User Manual |
Plug the supplied 5V/1A DC adapter into the unit, connect an HDMI source to the input and a display to the HDMI output, then use the three-position audio-mode switch to select PASS for bitstream passthrough, 2.0CH for stereo downmix or 5.1CH for surround downmix.
Both the optical Toslink port and the RCA stereo jacks are passive connectors with no moving parts; they do not wear out in normal use and require no scheduled maintenance.
The HDMI 1.4b link caps the signal at 4K@30Hz with 36-bit deep colour, so sustained 4K playback is limited to 30 frames per second regardless of source capability.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?