We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with one DisplayPort input, three outputs and a micro-USB power socket

Jansicotek

Jansicotek 3-Port DP 1.4 Splitter 8K@30Hz 4K@144Hz

SKU CH-D4SX-EPMYB

Splits one DisplayPort 1.4 source into three 8K@30Hz or 4K@144Hz displays with mirror or MST modes

  • TypeDisplayPort Switchers
  • Ports2
  • Input Connector1 x DisplayPort 1.4
  • Output Connector3 x DisplayPort 1.4
  • Maximum Resolutions8K@30Hz 4K@120Hz
  • BandwidthHigh Speed 32.4Gbps
  • Split one DisplayPort source to three displays
  • Mirror or extend across three screens via MST
  • Single output reaches 8K at 30 Hz or 4K at 144 Hz
  • All three ports deliver 4K at 60 Hz simultaneously
  • USB-powered for stable operation with discrete graphics

Jansicotek DP 1.4 Splitter 1x3

The Jansicotek DisplayPort 1.4 splitter takes a single DP source and distributes it to three DP 1.4 displays. It operates in mirror mode for identical output or MST mode for independent screens. The host requires the included USB-A to Micro-B cable for power. It is intended for users with a discrete graphics card; integrated graphics may encounter compatibility limits.

Passive operation thermals noise power

The unit has no active cooling, so it runs silently and adds negligible heat to a workstation. Power is drawn only from the external USB connection, keeping system load minimal. Typical desktop use at 4K@60Hz or 1440p@144Hz remains stable without thermal throttling. Bandwidth capacity is rated at 32.4 Gbps across the link.

Sustained load MST multi-monitor behaviour

Under continuous MST expansion, a single active port can maintain 8K@30Hz or 4K@144Hz while all three ports simultaneously deliver 4K@60Hz. Apple systems restrict MST to one extended display due to OS limitations. The splitter supports DP 1.0 through 1.4 signalling, 3D formats, and refresh rates up to 165Hz at 1440p without signal degradation over extended sessions.

Highlights

  • Split one DisplayPort source to three displays
  • Mirror or extend across three screens via MST
  • Single output reaches 8K at 30 Hz or 4K at 144 Hz
  • All three ports deliver 4K at 60 Hz simultaneously
  • USB-powered for stable operation with discrete graphics

Specifications

TypeDisplayPort Switchers
Ports2
Input Connector1 x DisplayPort 1.4
Output Connector3 x DisplayPort 1.4
Maximum Resolutions8K@30Hz 4K@120Hz
BandwidthHigh Speed 32.4Gbps
Package Contents1 x DP splitter host
1 x U SB A t o U SB Micr o B power supply line
1 x User Manual

Questions about this item

How do I install the Jansicotek 3-port DP 1.4 splitter and what step is often missed?

Connect the single DisplayPort 1.4 input to your source, attach up to three DisplayPort 1.4 displays to the outputs, then plug the included USB-A to Micro-B cable into a powered USB port to supply the splitter — forgetting this power cable is the most common mistake.

What maintenance or replacement will the Jansicotek DP 1.4 splitter need over time?

The unit has no user-serviceable parts or consumables; if the USB power cable or any DisplayPort cable becomes damaged, replace that cable — the splitter itself requires no scheduled maintenance.

What is the first resolution limit I will hit when driving three displays simultaneously with this splitter?

In MST expansion mode all three outputs are capped at 3840x2160 @ 60 Hz, so 4K 60 Hz is the ceiling before bandwidth or stream limits appear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.