We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black SATA cables with 90-degree and straight locking connectors, 18 inches long

Jansicotek

Jansicotek 3-pack SATA III 6.0 Gbps cable 90° 18 in locking latch

SKU CH-7GFY-FPD3W

Three-pack of 18-inch SATA III cables with right-angle and straight locking connectors supporting 6.0 Gbps data transfer

  • ColorBlack
  • Transfers data at up to 6.0 Gbps with SATA 3.0 revision
  • Right-angle 90° and straight 180° connectors with locking latches secure the link
  • Three-cable pack gives spares for RAID or multiple drives
  • 18-inch length fits standard desktop chassis routing
  • Works with SATA I, II and III hard drives, SSDs and optical drives

Three-cable SATA III kit

This three-pack supplies three 18-inch SATA III cables rated for 6.0 Gbps data transfer. Each cable connects a motherboard or host controller to an internal hard drive, SSD or optical drive. The set gives builders spares for RAID arrays or quick replacements during upgrades.

Right-angle and straight connectors with locking

One end of every cable uses a 90-degree right-angle plug while the other end is a straight 180-degree plug, both fitted with locking latches. The right-angle shape eases routing behind drive cages and the latches prevent accidental disconnection from vibration or case movement. Black sheathing keeps the loom tidy inside the chassis.

No power delivery included

The cables carry data only, so each attached drive still requires a separate SATA power connector from the power supply. Backwards compatibility with SATA I and II devices means older drives work at their native speeds without extra adapters. The three-cable bundle reduces the need to order single cables for multi-drive builds.

Highlights

  • Transfers data at up to 6.0 Gbps with SATA 3.0 revision
  • Right-angle 90° and straight 180° connectors with locking latches secure the link
  • Three-cable pack gives spares for RAID or multiple drives
  • 18-inch length fits standard desktop chassis routing
  • Works with SATA I, II and III hard drives, SSDs and optical drives

Specifications

ColorBlack

Questions about this item

Does the SATA III 6.0 Gbps interface cap real-world speed at 6 Gbps?

The cable supports up to 6 Gbps, but actual throughput is limited by the drive and controller ratings.

What clearance does the 90° right-angle connector need to fit?

The 90° plug bends toward the cable body, so it fits tight drive bays where a straight 180° plug would hit the chassis.

How do you seat the locking latch so it does not pop loose?

Push each connector straight in until the latch clicks; angling the plug during insertion leaves the latch unlatched.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.