Jansicotek
Jansicotek 1x8 HDMI Splitter 4K 30Hz 10.2 Gbps 130ft
Distributes one HDMI source to eight displays at up to 4K 30Hz with 10.2 Gbps bandwidth and 130ft cable reach
- Ports8
- Distributes one source to eight displays simultaneously
- Supports 4K resolution at 30Hz for sharp visuals
- Delivers 10.2 Gbps bandwidth for stable signal transmission
- Extends signal up to 130ft using AWG26 standard cable
- Handles 48-bit deep color with extended color space support
1x8 HDMI Splitter 4K 30Hz
This Jansicotek splitter takes one HDMI source and sends the same signal to eight displays at once. It supports HDMI 1.4 with HDCP 1.3 and passes video formats up to 3840x2160 at 25 or 30 Hz. Audio formats include DTS-HD Master Audio, Dolby TrueHD and LPCM 7.1. A power supply adapter is included for stable operation.
Installers needing one-to-eight distribution
The unit suits conference rooms, classrooms, digital-signage walls and multi-monitor workstations where a single player or computer must drive eight screens. It also works as a signal booster at the end of a long cable run. Buyers who need higher refresh rates at 4K, more than eight outputs or HDMI 2.0 features should look at a different class of splitter.
Sustained signal over long cables
With 10.2 Gbps bandwidth and 48-bit deep colour the splitter maintains a clean picture over AWG26 cables up to 130 ft without visible degradation. The powered design keeps voltage levels steady across all eight ports during continuous use, so extended presentations or 24/7 signage loops stay stable. Heat remains low in the compact metal enclosure.
Highlights
- Distributes one source to eight displays simultaneously
- Supports 4K resolution at 30Hz for sharp visuals
- Delivers 10.2 Gbps bandwidth for stable signal transmission
- Extends signal up to 130ft using AWG26 standard cable
- Handles 48-bit deep color with extended color space support
Specifications
| Ports | 8 |
|---|
Questions about this item
What source device do I need to feed this 1×8 HDMI splitter?
Any device with an HDMI output — PC, laptop, streaming stick, game console, Blu-ray player or similar — supplies the single input this unit requires.
Will my older 1080p monitors and 720p projectors still display correctly when connected to the eight outputs?
Yes. The splitter handles 480i through 1080p as well as 4K at 25/30 Hz, so legacy displays work alongside newer 4K screens without extra configuration.
How can I confirm the splitter is passing 4K at 30 Hz and 10.2 Gbps to all eight screens after I connect everything?
Play 4K 30 Hz test content from the source and verify each display reports 3840×2160 at 30 Hz with deep colour enabled; the regenerated signal should reach up to 130 ft per output.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
