We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with volume knob, RCA and 3.5mm outputs, optical and USB inputs, Bluetooth 5.0 antenna, remote control included

Jansicotek

Jansicotek 192KHz DAC Bluetooth 5.0 Optical USB to RCA 3.5mm Audio Converter

SKU CH-7QV8-B2H98

Converts Bluetooth 5.0, USB and optical digital audio to analogue RCA and 3.5 mm outputs at up to 192 kHz / 24-bit with 125 mW headphone power

  • TypeDigital to Analog Audio Converter
  • Connector A1 x SPDIF & USB & Bluetooth Receiver Input
  • Connector B1 x L/R RCA & 3.5mm Audio Jack Output
  • AudioYes
  • Package Contents1 x Digital to analog audio converter 1 x USB power cable 1
  • High-resolution 192KHz 24-bit audio for detailed sound reproduction
  • Bluetooth 5.0 wireless streaming from phones and tablets
  • USB flash drive playback without a computer
  • Optical SPDIF input accepts PCM and LPCM at multiple sample rates
  • Dual RCA and 3.5mm outputs with 125mW headphone amplification

Multifunction 192KHz DAC Converter

This Jansicotek unit converts digital audio from three sources — Bluetooth 5.0, optical Toslink and USB flash drives — into analogue stereo on both RCA phono and 3.5 mm jacks. A built-in DAC chip handles PCM and LPCM streams at sampling rates up to 192 kHz and 24-bit depth. Volume is adjusted by a front-panel knob and the supplied infrared remote control.

Users needing wireless

The converter suits anyone connecting a phone, TV optical output or USB stick directly to an amplifier, powered speakers or headphones without a separate streamer or AV receiver. It is not for installations that require coaxial digital input, balanced XLR output, multi-channel surround decoding or network streaming protocols.

192 kHz 24-bit maximum sampling rate

Optical and USB inputs accept PCM/LPCM at 32, 44.1, 48, 96 and 192 kHz; the headphone amplifier delivers 125 mW per channel into 32 ohms and supports impedances from 16 to 300 ohms. If your source material uses higher sample rates or bit depths this device will not pass them through.

Highlights

  • High-resolution 192KHz 24-bit audio for detailed sound reproduction
  • Bluetooth 5.0 wireless streaming from phones and tablets
  • USB flash drive playback without a computer
  • Optical SPDIF input accepts PCM and LPCM at multiple sample rates
  • Dual RCA and 3.5mm outputs with 125mW headphone amplification

Specifications

TypeDigital to Analog Audio Converter
Connector A1 x SPDIF & USB & Bluetooth Receiver Input
Connector B1 x L/R RCA & 3.5mm Audio Jack Output
AudioYes
Package Contents1 x Digital to analog audio converter
1 x USB power cable
1 x IR Remote Control
1 x User Manual

Questions about this item

How often will the USB power cable need replacing under daily use?

The converter draws power through the supplied USB cable; no internal battery or consumable part requires scheduled replacement.

What sampling-rate ceiling limits the optical input when playing high-resolution tracks continuously?

Optical and coaxial inputs accept PCM or LPCM at 32, 44.1, 48, 96 and 192 KHz, so 192 KHz is the highest supported rate.

How warm does the unit get and does the fan run loudly during all-day Bluetooth streaming?

The device has no fan; it runs silently and stays cool because the 125 mW headphone amplifier operates well within its 16 to 300 ohm load range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.