We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Jansicotek

Jansicotek 192KHz DAC Bluetooth 5.0 Headphone Amp SPDIF USB to RCA 3.5mm

SKU CH-KGJV-WGN2M

Converts Bluetooth 5.0, optical and USB digital audio to analogue RCA and 3.5 mm outputs with a 125 mW headphone amp at 192 kHz 24-bit

  • TypeDigital to Analog Audio Converter
  • Connector A1 x SPDIF & USB & Bluetooth Receiver Input
  • Connector B1 x L/R RCA & 3.5mm Audio Jack Output
  • AudioYes
  • Package Contents1 x Digital to analog audio converter 1 x USB power cable 1
  • High-resolution 192KHz 24-bit audio conversion for detailed sound
  • Bluetooth 5.0 wireless streaming from phones and tablets
  • USB flash-drive playback without a computer
  • Built-in 125mW headphone amp drives 16-300ohm headphones
  • Simultaneous RCA and 3.5mm analogue outputs for flexible connections

What it does

The Jansicotek unit converts digital audio from Bluetooth 5.0, USB storage or SPDIF optical sources into analogue stereo through RCA and 3.5mm outputs. A built-in headphone amplifier delivers 125mW per channel into 32ohm loads, so listeners can plug in directly without a separate amp.

Deciding spec

The DAC supports sampling rates of 32, 44.1, 48, 96 and 192KHz at 24bit depth over optical and coaxial inputs, and only accepts PCM or LPCM formats. If your source outputs Dolby Digital, DTS or multichannel bitstreams, this converter will not decode them.

Build fit

Power comes from the included USB cable, so a spare USB port or 5V charger is required. The front-panel volume knob controls both line and headphone levels simultaneously, freeing you from hunting for a remote, though an IR handset is also supplied for distance adjustments.

Highlights

  • High-resolution 192KHz 24-bit audio conversion for detailed sound
  • Bluetooth 5.0 wireless streaming from phones and tablets
  • USB flash-drive playback without a computer
  • Built-in 125mW headphone amp drives 16-300ohm headphones
  • Simultaneous RCA and 3.5mm analogue outputs for flexible connections

Specifications

TypeDigital to Analog Audio Converter
Connector A1 x SPDIF & USB & Bluetooth Receiver Input
Connector B1 x L/R RCA & 3.5mm Audio Jack Output
AudioYes
Package Contents1 x Digital to analog audio converter
1 x USB power cable
1 x IR Remote Control
1 x User Manual

Questions about this item

What does the 192 kHz sampling rate actually deliver when I play music through this converter?

The built-in DAC chip handles up to 192 kHz at 24-bit depth, so high-resolution optical or USB files are decoded to analogue RCA and 3.5 mm outputs without down-sampling.

How does the Bluetooth 5.0 input limit the audio quality I can stream?

Bluetooth 5.0 receives the stream, then the internal DAC converts it to analogue at the same 192 kHz / 24-bit capability used by the optical and USB inputs.

What headphone impedance range can I plug straight into the 3.5 mm jack?

The amplifier is rated 125 mW per channel at 32 ohms and is designed for headphones between 16 and 300 ohms.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.