We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 20 cm cable with 4-pin Molex female to SATA 15-pin power connectors

JacobsParts Inc.

JacobsParts MLX-STA01 4-pin Molex to SATA 15-pin power adapter cable 20 cm

SKU CH-3H3Y-W69X4

Adapts a 4-pin Molex connector to power a SATA drive with a 15-pin plug over a 20 cm cable

  • TypeCable
  • Length20 cm
  • Connector Detail4 Pin Molex
  • Powers SATA drives from a 4-pin Molex connector
  • 20 cm length keeps cable routing tidy inside the case
  • Single 4-pin Molex female to 15-pin SATA power connector
  • Simple plug-in installation with no extra tools required
  • Compatible with all SATA hard drives and SSDs

Power a SATA drive from Molex

This 20 cm cable converts a single 4-pin Molex connector into a 15-pin SATA power plug so you can run a SATA hard drive or SSD from an older power supply. It is built for anyone adding SATA storage to a system that only offers Molex leads.

Fits tight routing paths

The short 20 cm length keeps excess wire out of the airflow path and works in compact cases where longer adapters would not tuck away cleanly. No extra power rails or splitters are required; the adapter draws directly from the existing Molex line.

Ready to use immediately

The LP4 female end mates with the supply and the SATA power connector mates with the drive, so installation is a straight plug-in with no drivers or configuration. Builders who need to power multiple SATA devices from one Molex lead will need a different solution.

Highlights

  • Powers SATA drives from a 4-pin Molex connector
  • 20 cm length keeps cable routing tidy inside the case
  • Single 4-pin Molex female to 15-pin SATA power connector
  • Simple plug-in installation with no extra tools required
  • Compatible with all SATA hard drives and SSDs

Specifications

BrandJacobsParts
ModelMLX-STA01
TypeCable
Length20 cm
Connector Detail4 Pin Molex

Questions about this item

How many SATA drives can the MLX-STA01 power from one Molex connector?

The cable provides a single 15-pin SATA power connector, so it powers one drive per adapter.

Does the 20 cm cable length affect voltage drop or heat during continuous operation?

At 20 cm the resistance is negligible, so voltage drop and heat stay minimal even with the drive running all day.

What power connector must the power supply already have for this adapter to work?

The power supply needs a standard 4-pin Molex (LP4) output to plug into the female end of this cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.