We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua blue Mini SAS SFF-8087 to four SATA breakout cable, 3.3 ft length

JacobsParts Inc.

JacobsParts Mini SAS SFF-8087 to 4 SATA 3.3 ft Aqua Blue

SKU CH-KMK3-108DM

Internal breakout cable links an SFF-8087 controller to four SATA drives at 6 Gb/s each

  • TypeSATA III
  • ColorAqua Blue
  • Length3.3 ft.
  • Connector Number4
  • StyleSAS32PIN-4XSATA7PIN
  • Connects RAID or PCIe controller SFF-8087 port to four SATA drives
  • Supports 6Gbs data transfer rate per drive for fast storage
  • 3 ft length with slim ribbon cables for minimal airflow impact
  • Woven mesh sheath and acetate tape provide strain relief and easy routing
  • Low-profile SATA connectors with stainless steel latches prevent accidental disconnection

Internal SAS breakout cable

This new JacobsParts cable connects a RAID or PCIe controller equipped with an internal SFF-8087 port to four SATA drives. It uses a 32-pin Mini SAS connector that fans out to four 7-pin SATA connectors over a 3.3 ft length. The assembly supports up to 6Gb/s per drive and uses slim ribbon cables wrapped in woven mesh sheathing.

Suits RAID expansion with internal controllers

Builders adding multiple SATA disks to a host bus adapter with an SFF-8087 interface will find the forward breakout layout convenient. Low-profile SATA plugs with steel latches resist vibration disconnects. It is not for systems lacking an internal SFF-8087 port, for external drive enclosures, or for connecting SAS drives directly.

32-pin SFF-8087 to four SATA 7-pin

The single specification that decides fit is the connector pairing: a 32-pin internal Mini SAS plug on one end and four standard SATA 7-pin receptacles on the other. If the controller presents a different port style or the drives require a different interface, this cable will not work.

Highlights

  • Connects RAID or PCIe controller SFF-8087 port to four SATA drives
  • Supports 6Gbs data transfer rate per drive for fast storage
  • 3 ft length with slim ribbon cables for minimal airflow impact
  • Woven mesh sheath and acetate tape provide strain relief and easy routing
  • Low-profile SATA connectors with stainless steel latches prevent accidental disconnection

Specifications

TypeSATA III
ColorAqua Blue
Length3.3 ft.
Connector Number4
StyleSAS32PIN-4XSATA7PIN

Questions about this item

Will the SFF-8087 connector or the four SATA latches need periodic replacement?

The stainless-steel latches on each low-profile SATA plug resist vibration disconnects, and the acetate cloth tape over the ribbon cables provides strain relief; no scheduled connector replacement is required.

What throughput ceiling appears first when all four drives run sustained transfers?

Each drive is limited to 6 Gb/s, so the combined ceiling is the PCIe 2.0 x8 host lane bandwidth shared across the four lanes.

How much extra heat or airflow restriction does the 3.3 ft ribbon add inside a packed case?

The slim ribbon cables and half-length woven mesh sheath are designed to minimise airflow impact while routing between controller and drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.