We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black rectangular PoE splitter adapters with Ethernet and DC connectors

JacobsParts Inc.

JacobsParts Inc. POESPL-E 48V 12V 2A PoE Splitter Adapter 2-Pack

SKU CH-M1T5-T09MW

Powers non-PoE devices over Ethernet with 12V 2A output, 5.5×2.1 mm DC plug, IEEE 802.3af compliant, overvoltage protection, two-pack

  • ColorBlack
  • CompatibilityInternet Protocol Camera

Option 2 pack

  • Powers non-PoE devices over Ethernet cables
  • IEEE 802.3af compliant with 24W output
  • 12V 2A supply via 5.5x2.1mm DC connector
  • Plug-and-play setup needs no configuration
  • Overvoltage protection safeguards connected equipment

Power over Ethernet splitter kit

This two-pack converts a 48 V PoE feed into 12 V DC at 2 A for devices that lack native PoE support. Installers running IP cameras, VoIP phones or wireless access points can power each unit from a single Ethernet cable. The adapters comply with IEEE 802.3af and include overvoltage protection for safe operation. No software configuration is required.

IEEE 802.3af compliance and 24 W output

Each splitter delivers a regulated 12 V 2 A supply through a 5.5 mm by 2.1 mm barrel connector. The 24 W limit determines whether a specific camera or access point can be powered; devices drawing more current will not start reliably. Verify the target device’s rated draw before deployment. The standard guarantee ensures interoperability with compliant PoE switches and injectors.

Passive cooling and silent operation

The compact enclosure dissipates heat without a fan, so the adapter adds no audible noise to a ceiling or wall mount. Power draw from the PoE source matches the connected load up to the 24 W ceiling. Overvoltage protection clamps transient spikes without interrupting the data path. The sealed plastic housing is suited for indoor wiring closets and sheltered outdoor boxes.

Highlights

  • Powers non-PoE devices over Ethernet cables
  • IEEE 802.3af compliant with 24W output
  • 12V 2A supply via 5.5x2.1mm DC connector
  • Plug-and-play setup needs no configuration
  • Overvoltage protection safeguards connected equipment

Specifications

BrandJacobsParts
ModelPOESPL-E
ColorBlack
CompatibilityInternet Protocol Camera

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 24 W output actually power in a real installation?

It runs a typical 12 V IP camera, VoIP phone or wireless access point that draws up to 2 A.

How does the IEEE 802.3 af limit affect what I can connect?

The standard caps the splitter at 24 W, so any 12 V device needing more than 2 A will not start.

Will the 5.5 × 2.1 mm barrel plug fit my device's power jack?

It matches the common 5.5 mm outer and 2.1 mm inner diameter used on most 12 V cameras and APs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.