We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tiny green circuit board with solder pads and black components, 22 by 17 mm

JacobsParts Inc.

JacobsParts Inc. MP1584 5V 3A buck module 4.5-28V input

SKU CH-W1S4-PDARS

Ultra-small 22×17×4 mm buck module converts 4.5–28 V to fixed 5 V at 1.5 A sustained with up to 92 % efficiency

  • Type5V
  • Input Voltage28 Volts
  • Fixed 5 V output simplifies USB-power projects
  • Ultra-compact 22×17×4 mm module fits tight spaces
  • Wide 4.5–28 V input suits battery or wall supplies
  • Synchronous rectification reaches up to 92 % efficiency
  • 0 MHz switching keeps ripple below 30 mV

Fixed 5V 3A buck module for USB-powered devices

The JacobsParts MP1584 module steps a 4.5-28V supply down to a fixed 5V output rated at 3A peak and 1.5A sustained. Its ultra-small 22x17x4mm footprint suits tight enclosures where a standard USB power adapter will not fit. The non-isolated synchronous design reaches up to 92% efficiency.

Verify input range and current budget before

Confirm the source voltage stays between 4.5V and 28V and that the load never exceeds 1.5A continuous or 3A peak. The regulator has no adjustment potentiometer, so the 5V output cannot be trimmed. Reverse polarity or back-feeding the output will damage the IC, so protect the input accordingly.

Sustained load limited to 1.5A with low ripple

Under continuous draw the module delivers 1.5A while maintaining under 30mV ripple at no load and 1.0MHz switching frequency. Efficiency drops as the input-to-output differential widens, so thermal headroom shrinks at higher supply voltages. The peak 3A rating is only for short transients, not steady operation.

Highlights

  • Fixed 5 V output simplifies USB-power projects
  • Ultra-compact 22×17×4 mm module fits tight spaces
  • Wide 4.5–28 V input suits battery or wall supplies
  • Synchronous rectification reaches up to 92 % efficiency
  • 0 MHz switching keeps ripple below 30 mV

Specifications

ModelDCMOD-I-5V
Type5V
Input Voltage28 Volts

Questions about this item

Does the 5‑pack include header pins or cables, or must they be purchased separately?

The listing supplies five bare MP1584 buck modules only; header pins, wires or USB connectors are not included and must be sourced separately.

Why choose the fixed 5 V 3 A peak version instead of an adjustable regulator?

Fixed 5 V output removes the need for trimming and guarantees the exact voltage USB‑powered devices expect, while still delivering 3 A peak and 1.5 A sustained current.

What does the 92 % efficiency figure mean when the module is running at 1.5 A sustained load?

At 1.5 A sustained output the converter typically reaches up to 92 % efficiency, so only about 8 % of input power becomes heat, keeping the 22 × 17 mm board cool.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.