We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five red SATA cables with 90 degree connectors, 18 inch length

JacobsParts Inc.

JacobsParts Inc. 5-pack 18" SATA 3.0 cable 90° red

SKU CH-SE4H-T89G2

Five 18-inch red SATA 3.0 cables with 90-degree connectors for tight drive bays

  • TypeSATA III
  • ColorRed
  • Length1.5 ft.
  • Cable Length1.5 ft.
  • Connector Number2
  • Connector Detail1 x SATA to 1 x SATA
  • Five cables for multiple drive installs
  • 18-inch length reaches drives across the case
  • 90-degree connector fits tight spaces
  • Red colour simplifies cable identification
  • SATA 3.0 rated for 6 Gb/s throughput

Five-cable pack for internal storage builds

This pack contains five 18-inch SATA 3.0 cables designed to connect Serial ATA drives to a motherboard or controller. They suit desktop computers, servers, workstations, RAID arrays and NAS units. Each cable is coloured red for easy identification inside a chassis.

90-degree connectors fit tight drive bays

Every cable ends in one straight and one right-angle SATA plug, letting the L-shaped end sit flush against a drive in cramped bays or behind large graphics cards. The 1.5-foot length reaches most motherboard ports without excess slack that blocks airflow.

SATA III rated for sustained 6 Gbit/s transfers

The cables meet the SATA 3.0 specification, supporting continuous 6 Gbit/s throughput during long copy jobs or RAID rebuilds. Backward compatibility with SATA I and II ensures they work with older drives without speed negotiation issues.

Highlights

  • Five cables for multiple drive installs
  • 18-inch length reaches drives across the case
  • 90-degree connector fits tight spaces
  • Red colour simplifies cable identification
  • SATA 3.0 rated for 6 Gb/s throughput

Specifications

BrandJacobsParts
TypeSATA III
ColorRed
Length1.5 ft.
Cable Length1.5 ft.
Connector Number2
Connector Detail1 x SATA to 1 x SATA
Style1 X SATA(90 degree)

Questions about this item

What does the 6 Gb/s rating mean once the cable is installed in a system?

The cable supports the SATA 3.0 specification up to 6 Gb/s, so a SATA III drive can run at its full interface speed.

Which SATA standard does the 90-degree connector follow, and what speed does that cap at?

The connectors comply with the SATA III standard, limiting the link to 6 Gb/s even if the host or drive is capable of more.

How much clearance does the 90-degree plug need behind a drive to fit?

The right-angle connector bends the cable parallel to the drive, reducing the rear profile so it fits in tight drive bays or against a chassis wall.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.