We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 32 cm black Y-splitter cable with one 5.5×2.1 mm female jack and two matching male plugs

JacobsParts Inc.

JacobsParts DCSPLIT-D 1:2 DC Power Splitter Cord 5.5x2.1mm 32cm 20AWG

SKU CH-T9AW-R54WD

Splits one 5.5x2.1mm DC source into two male plugs using 20AWG pure-copper wire rated for 8A across 5-48V

  • TypeSplitter Cable
  • Cable Length32cm
  • Connector StyleCoaxial DC Power
  • Splits one 12V source to two devices via 5.5*2.1mm connectors
  • 32cm length keeps CCTV or LED runs tidy without extra cable
  • 20AWG pure copper carries up to 8A with minimal voltage drop
  • Works across 5-48V range for flexible 12V installs
  • 5 inch end-to-end span fits tight enclosures cleanly

One-to-two DC power splitter

This JacobsParts DCSPLIT-D cable splits a single 5.5 mm by 2.1 mm barrel connector into two male plugs. It lets two compatible devices share one power supply. The cord measures 32 cm end to end and uses 20 AWG pure copper wire. It supports a voltage range of 5 to 48 V at up to 8 A.

Check connector size and current draw

Verify that both devices use the 5.5 mm outer and 2.1 mm inner barrel format before ordering. Confirm the combined current draw of the two devices stays within the 8 A limit of the splitter. Ensure the power supply voltage falls between 5 V and 48 V. The 32 cm length suits equipment placed close together.

Suits dual-camera or LED strip installs

Installers running two CCTV cameras or LED strips from one adapter will find this splitter convenient. It is not intended for devices that need a different barrel size or a higher current rating. Builders needing more than two outputs or a longer reach should consider alternative wiring solutions.

Highlights

  • Splits one 12V source to two devices via 5.5*2.1mm connectors
  • 32cm length keeps CCTV or LED runs tidy without extra cable
  • 20AWG pure copper carries up to 8A with minimal voltage drop
  • Works across 5-48V range for flexible 12V installs
  • 5 inch end-to-end span fits tight enclosures cleanly

Specifications

BrandJacobsParts
ModelDCSPLIT-D
TypeSplitter Cable
Cable Length32cm
Connector StyleCoaxial DC Power

Questions about this item

Does the 32cm splitter cord include both male plugs, or do I need to buy them separately?

The cable arrives with one 5.5*2.1mm female jack and two 5.5*2.1mm male plugs already attached; nothing else is required to connect two devices.

Should I choose a different length or gauge for a 12V CCTV camera run?

This model is fixed at 32cm and 20AWG pure copper; if the camera needs a longer reach or lower voltage drop, a separate extension cable would be needed.

What does the 8A combined current limit mean when I power two 12V LED strips from one supply?

Both strips together must not draw more than 8A total, so at 12V the combined load stays within the splitter's rating as long as the power supply can deliver the required current.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.