We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black box with four gold-plated RCA plugs and four matching sockets

JacobsParts Inc.

JacobsParts AFILTER-D 4-Channel RCA Noise Isolator 50W

SKU CH-GAGD-96E8F

Eliminates ground-loop hum and buzz between source and amplifier with a passive in-line filter rated 50 W continuous and 100 W peak

  • TypeNoise Isolator
  • Connector Detail4x RCA Male, 4x RCA Female
  • FeaturesGold plated
  • Eliminates ground-loop hum and buzz between source and amplifier
  • Filters DC current from the signal path for cleaner audio
  • Passive in-line design needs no external power supply
  • Gold-plated RCA connectors resist corrosion for reliable contact
  • Handles 50 W rated and 100 W peak input power

Ground-loop isolator for car audio

This four-channel RCA isolator sits between a head unit and an amplifier or equaliser to remove the humming and buzzing caused by ground-loop currents. It uses a passive, in-line design with gold-plated male and female RCA connectors on each channel.

Rated 50 W continuous and 100 W peak

The unit handles up to 50 watts of continuous signal per channel and tolerates peaks of 100 watts without distortion. Systems demanding higher sustained power will exceed its capacity and require a different solution.

Passive operation with no power draw

Because the filter is completely passive it adds no electrical load, generates no heat and runs silently. There are no active components to introduce noise or require a separate power connection.

Highlights

  • Eliminates ground-loop hum and buzz between source and amplifier
  • Filters DC current from the signal path for cleaner audio
  • Passive in-line design needs no external power supply
  • Gold-plated RCA connectors resist corrosion for reliable contact
  • Handles 50 W rated and 100 W peak input power

Specifications

BrandJacobsParts
ModelAFILTER-D
TypeNoise Isolator
Connector Detail4x RCA Male, 4x RCA Female
FeaturesGold plated

Questions about this item

Will the AFILTER-D work with my existing car head unit that uses standard RCA outputs?

Yes, the four male RCA plugs connect to the head unit outputs and the four female RCA sockets accept the amplifier leads, so it fits a standard RCA chain without adapters.

How can I confirm the isolator is removing the ground-loop hum after installation?

Play audio with the engine running; if the alternating-current hum or buzz disappears and only the music remains, the filter is suppressing the ground-loop noise as designed.

What comes in the package and do I need any extra cables?

The box contains the passive in-line isolator with four gold-plated male and four gold-plated female RCA connectors; no additional cables are required if your head unit and amp already use RCA leads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.