We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black box with two XLR outputs and network port

J-Tech Digital Inc.

J-Tech Digital JTECH-DA2DX 2-Channel Dante to XLR Audio Video Converter

SKU CH-7J68-3PV63

Converts two-channel Dante digital audio to balanced or unbalanced XLR analog output with 24-bit sampling rates up to 96 kHz, configurable delay and 5-level gain, powered by USB-C or PoE

  • Thunderbolt 3XLR
  • FeaturesDante to XLR Analog Audio
  • Converts 2-channel Dante to balanced XLR analog output
  • 24-bit audio at 44.1, 48, 88.2, 96 kHz sampling rates
  • Configurable 1, 2, 5 ms delay for precise synchronization
  • 5-level gain control from +18 dBu to -10 dBv
  • Powered by USB-C or PoE 802.3af for flexible installation

2-Channel Dante to XLR Converter

The J-Tech Digital JTECH-DA2DX converts two-channel Dante digital audio into balanced or unbalanced XLR analog signals. It suits live sound engineers, broadcast technicians, and studio installers who need to extract analog feeds from a Dante network. The compact adapter bridges digital infrastructure and traditional analog gear without a full rack unit.

Dante Sampling Rates and Latency Limits

Audio runs at 24-bit across 44.1, 48, 88.2, and 96 kHz sampling rates. Configurable delay settings of 1, 2, or 5 ms help align signals in complex systems, but the fixed options limit fine synchronization for demanding phase-critical applications. The device handles two channels only, so larger channel-count breakouts require additional units.

Dual Power and Gain Flexibility

Power comes from USB-C or PoE Class 0 (802.3af), allowing rack, stage, or desktop placement without a dedicated mains adapter. Five input sensitivity levels from +18 dBu down to -10 dBv match professional and consumer line levels, preventing overload or noise floor issues. XLR outputs provide secure locking connections for touring or permanent installs.

Highlights

  • Converts 2-channel Dante to balanced XLR analog output
  • 24-bit audio at 44.1, 48, 88.2, 96 kHz sampling rates
  • Configurable 1, 2, 5 ms delay for precise synchronization
  • 5-level gain control from +18 dBu to -10 dBv
  • Powered by USB-C or PoE 802.3af for flexible installation

Specifications

BrandJ-Tech Digital
ModelJTECH-DA2DX
Part NumberJTD-3251
Thunderbolt 3XLR
FeaturesDante to XLR Analog Audio

Questions about this item

Which sampling rate should I select for my Dante network?

Choose 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz to match your Dante clock; all run at 24-bit resolution.

What does 24-bit at 96 kHz mean for live sound?

It delivers full-bandwidth audio with configurable delay of 1 ms, 2 ms or 5 ms for tight sync in multi-zone setups.

Will PoE Class 0 power the unit over a standard Ethernet run?

Yes, the adapter draws power through the Dante network port using IEEE 802.3af Class 0, so a single Cat cable handles audio and power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.