We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular box with three Toslink output ports and one input port

J-Tech Digital JTDAT5CH Optical Splitter 1x3

SKU CH-8MAS-VTKK1

Splits one optical audio signal to three Toslink outputs with Dolby Digital, DTS 5.1 and PCM stereo support up to 130 ft

  • Mount Size3.7 in x 2.33 in x 0.7 in
  • ColorBlack
  • SpecificationOptical Splitter 1X3
  • Wireless Supportnot_capable_emitting_rf_energy
  • SDIOptical Splitter 1X3, Plug
  • Network InterfaceOptical
  • Splits one optical input to three Toslink outputs
  • Supports 5.1 Dolby Digital and DTS surround sound
  • Handles PCM stereo at 32, 44.1, 48 and 96 kHz
  • Over-voltage protection guards against mismatched power adapters
  • Signal travels up to 130 ft with less than .2 dB/m loss

Optical Splitter 1x3 for SPDIF/Toslink

The J-Tech Digital JTDAT5CH takes a single optical fibre input and distributes it to three SPDIF or Toslink receivers. It handles Dolby Digital and DTS 5.1 surround sound as well as PCM stereo at 32, 44.1, 48 and 96 kHz. Setup is plug and play with no configuration required.

Sustained signal integrity over distance

Optical fibre cable loss is rated below 0.2 dB per metre, allowing clean transmission up to 130 ft. The unit includes over-voltage protection to guard against damage from mismatched power adapters. Signal retiming helps maintain timing accuracy during continuous operation.

Upgrade from single-output source devices

This splitter replaces the need to swap cables when feeding one source into multiple soundbars, AV receivers or recording interfaces. The jump is worth it when a DVD player, console or streamer must drive three zones simultaneously without quality loss. Buyers who need more than three outputs or analogue conversion should look elsewhere.

Highlights

  • Splits one optical input to three Toslink outputs
  • Supports 5.1 Dolby Digital and DTS surround sound
  • Handles PCM stereo at 32, 44.1, 48 and 96 kHz
  • Over-voltage protection guards against mismatched power adapters
  • Signal travels up to 130 ft with less than .2 dB/m loss

Specifications

BrandJ-Tech Digital
SeriesOptical Audio Splitter (1x3)
ModelJTDAT5CH
Part NumberJTDAT5CH
Mount Size3.7 in x 2.33 in x 0.7 in
ColorBlack
SpecificationOptical Splitter 1X3
Wireless Supportnot_capable_emitting_rf_energy
SDIOptical Splitter 1X3, Plug
Network InterfaceOptical
VGAOptical Splitter 1X3, Plug
ComponentOptical Audio Splitter (1x3), Optical Splitter 1X3
DisplayOptical Splitter 1X3 - J-Tech Digital - JTDAT5CH
System RequirementsDVD Player
Power Consumptiontrue
Power Supplytrue
FeatureOptical Splitter 1X3
Dimensions5.7912 cm x 11.9126 cm x 14.605 cm
Weight0.159 kilograms
Package Content1

Questions about this item

Does the JTDAT5CH run hot or draw much power when it splits a signal all day?

The splitter has no fan and consumes very little power; it stays cool during continuous use because it only retimes and distributes the optical signal.

What cables and source gear do I need before the JTDAT5CH will pass audio to three zones?

You need one Toslink cable from a source such as a DVD player into the single input, plus three Toslink cables running from the outputs to each receiving device.

Will the JTDAT5CH work with my older AV receiver that only accepts PCM stereo at 48 kHz?

Yes — the splitter passes PCM stereo at 32 kHz, 44.1 kHz, 48 kHz and 96 kHz untouched, so a legacy 48 kHz-only receiver will receive a compatible stream.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.