We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black metal box with HDMI ports and CAT5/CAT6 jacks, IR receiver window and loop-out label

Orei LLC

Orei LLC HDMI Extender Over CAT5/CAT6 IR Loop Out 1080p Signal Routing

SKU CH-3ANS-DVTWK

Extends 1080p HDMI signals up to 330 feet over Cat5e/Cat6 with IR remote control and local HDMI loop-out

  • Extends HDMI up to 330 feet over Cat5e/Cat6 cable
  • IR control extension at 38 kHz for remote source operation
  • HDMI loop-out on transmitter enables local display monitoring
  • Supports 1080p at 50/60 Hz with zero driver installation
  • Compliant with HDMI 1.3 and HDCP 1.4 standards

Extends HDMI up to 330 feet

The Orei HDMI extender sends 1080p video and audio over a single Cat5e or Cat6 cable to a display up to 330 feet away. It supports point-to-point links and can be expanded to one-to-many distribution with additional receivers sold separately. The unit handles 480i, 480p, 576i, 576p, 720p and 1080i at 50 or 60 Hz, plus 1080p at 50 and 60 Hz without driver installation. M-JPEG compression keeps image quality loss minimal across the run.

Loop-out and IR control for installers

A local HDMI loop output on the transmitter lets you connect a nearby monitor for confidence monitoring or cascading the signal further. The 38 kHz IR extension carries remote-control commands back to the source device from the display side. HDMI 1.3 and HDCP 1.4 compliance ensures compatibility with common Blu-ray players, set-top boxes and media streamers. Cat5e or Cat6 cabling and power for both units are the only infrastructure required.

Replaces short HDMI runs and basic splitters

This kit replaces direct HDMI cables that hit their length limit well before 100 metres and simple splitters that cannot reach a second room. The jump is worth it when the source and display are separated by walls, ceilings or floors and you need reliable 1080p delivery with remote control. It is not for buyers who need 4K resolution, HDR metadata or HDCP 2.2 handshake support.

Highlights

  • Extends HDMI up to 330 feet over Cat5e/Cat6 cable
  • IR control extension at 38 kHz for remote source operation
  • HDMI loop-out on transmitter enables local display monitoring
  • Supports 1080p at 50/60 Hz with zero driver installation
  • Compliant with HDMI 1.3 and HDCP 1.4 standards

Specifications

No published specifications for this item yet.

Questions about this item

How far can the 1080p signal travel over a single Cat5e or Cat6 cable?

The extender delivers full HD 1080p up to 330 feet (100 metres) over one Cat5e or Cat6 run without compression artefacts.

Does the transmitter or receiver generate noticeable heat or fan noise during continuous operation?

The units are passively cooled with no moving parts, so they run silently and stay at a low temperature even when powered all day.

Which cables and power supplies must I already have to set up a point-to-point link?

You need one Cat5e or Cat6 patch cable between the boxes, an HDMI cable from source to transmitter, another HDMI cable from receiver to display, and the two included power adapters plugged into mains sockets.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.