We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60 cm cable with 8-pin male PSU end splitting to two 6+2-pin male GPU connectors

J&D Tech PCIe-8P-2X6+2P-60cm-1PK internal power cable

SKU CH-QC41-QVXVP

Connects an 8-pin EPS/ATX/CPU PSU connector to dual 6+2 pin PCIe GPU power inputs using 18AWG tinned copper rated for 600W over 60cm length

  • TypeUSB 3.0
  • Length< 1"
  • Specifications8-pin Eps/Atx/Cpu, 6+2 Pin Pcie, 1 Pack
  • Connector Number10
  • Terminal GenderMale to Female
  • FeaturesJ&D, 1 Pack, 8-pin Eps/Atx/Cpu, 6+2 Pin Pcie
  • Connects 8-pin EPS to dual 6+2 pin PCIe for GPU power
  • 18AWG tinned copper core handles up to 600W reliably
  • 60cm total length provides flexible routing inside the case
  • Works with Corsair, Thermaltake and ARESGAME modular PSU series
  • Single pack avoids a full PSU upgrade when adding a graphics card

Connectivity and Compatibility

This 60 cm cable converts an 8-pin EPS/ATX/CPU output from a modular power supply into two 6+2 pin PCIe connectors for graphics cards. It suits builders who need extra GPU power leads without replacing the PSU. The male-to-male design plugs directly into the PSU and the card. Buyers whose PSU lacks the required 8-pin EPS port cannot use this adapter.

Build Integration

The 18 AWG tinned copper conductors are rated for up to 600 W, supporting high-end graphics cards within that limit. At 60 cm total length the cable reaches most full-tower layouts while avoiding excess slack. It works with listed Corsair, Thermaltake and ARESGAME modular series. Systems that require more than two PCIe connectors or a different PSU pinout will need additional cables.

Thermals and Power

The 18 AWG copper core handles the rated load with minimal voltage drop, keeping connector temperatures low during typical gaming or render workloads. No active cooling is required and the cable adds no audible noise. Power draw is determined entirely by the attached GPU; the cable itself introduces negligible resistance. Builds exceeding 600 W per cable should use separate PSU outputs.

Highlights

  • Connects 8-pin EPS to dual 6+2 pin PCIe for GPU power
  • 18AWG tinned copper core handles up to 600W reliably
  • 60cm total length provides flexible routing inside the case
  • Works with Corsair, Thermaltake and ARESGAME modular PSU series
  • Single pack avoids a full PSU upgrade when adding a graphics card

Specifications

BrandApple
ModelPCIe-8P-2X6+2P-60cm-1PK
TypeUSB 3.0
Length< 1"
Specifications8-pin Eps/Atx/Cpu, 6+2 Pin Pcie, 1 Pack
Connector Number10
Terminal GenderMale to Female
FeaturesJ&D, 1 Pack, 8-pin Eps/Atx/Cpu, 6+2 Pin Pcie
Disclaimernot_applicable

Questions about this item

Will the 18AWG tinned copper core handle sustained 600W loads without overheating?

The 18AWG tinned copper conductors are rated for up to 600W, providing stable power delivery for high-end graphics cards under continuous operation.

Does the cable generate noticeable heat or noise during all-day use?

Passive 18AWG copper wiring produces no audible noise and minimal heat at rated loads, keeping thermal impact inside the case negligible.

Which modular PSU connectors must I already own for this 8-pin to dual 6+2 pin cable to work?

You need a modular power supply with an available 8-pin EPS/ATX/CPU port on the PSU side; the cable then splits to two 6+2 pin PCIe connectors for the GPU.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.