We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black power brick with two long cables attached

iTekiro

iTekiro HP.TAC090WHPSM.N14 90W power inverter

SKU CH-E7V9-GFB6G

Replacement 90 W AC adapter for select HP 14 and 15 series laptops with 12 ft total cord length

  • Reach distant outlets with 12 ft total cable length
  • Protect laptop from surges with UL-listed AC cord and internal safeguards
  • Deliver steady 90 W output at 19.5 V 4.62 A for consistent performance
  • Operate worldwide on 100-240 V 50-60 Hz input without a converter
  • Withstand travel stress in rugged sealed case weighing 10.8 oz

Replacement HP 90W AC Adapter

The iTekiro HP.TAC090WHPSM.N14 is a 90 W laptop power supply built to replace HP 65 W and 90 W chargers. It accepts AC 100–240 V at 50–60 Hz for worldwide use and delivers 19.5 V DC at 4.62 A. A UL-listed 6 ft two-prong AC cord and a 6 ft DC cord give 12 ft total reach. The rugged case is sealed against moisture and high humidity.

Suitable for HP 14- and 15-inch models listed

This unit fits the HP 14-k, 14t-k, 15-j and 15t-j series notebooks shown in the compatibility list. It is not intended for laptops that require a 120 W adapter, so buyers needing higher wattage should look elsewhere. The fixed 19.5 V output also means it cannot serve devices that demand a different voltage. Travellers who need a smaller or lighter brick may prefer a more compact design.

Build integration notes

The adapter measures 4.25 x 1.89 x 1.18 inches and weighs 10.8 oz with both cables attached. Its 100–240 V input removes the need for a separate travel converter. The long cords free up desk layout by reaching distant sockets without an extension lead. Ensure the laptop’s original charger was rated 65 W or 90 W at 19.5 V before installing.

Highlights

  • Reach distant outlets with 12 ft total cable length
  • Protect laptop from surges with UL-listed AC cord and internal safeguards
  • Deliver steady 90 W output at 19.5 V 4.62 A for consistent performance
  • Operate worldwide on 100-240 V 50-60 Hz input without a converter
  • Withstand travel stress in rugged sealed case weighing 10.8 oz

Specifications

BrandiTekiro
ModelHP.TAC090WHPSM.N14

Questions about this item

Does the 19.5 V 4.62 A output work with an HP laptop that originally shipped with a 65 W charger?

Yes, the adapter replaces both 65 W and 90 W HP chargers; the 19.5 V 4.62 A rating covers the higher wattage while remaining compatible with the lower-wattage models.

Will the 100–240 V 50–60 Hz input let me use this adapter on a 240 V circuit abroad?

The input range covers 100 V through 240 V at 50 Hz or 60 Hz, so it operates on standard mains worldwide without a voltage converter.

How can I confirm the adapter is delivering power once I plug it in?

The laptop will show its charging indicator and the battery level will rise whether the system is on or off, verifying the 90 W output is active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.