We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminum hot-swap rack with five 3.5-inch drive bays and one 80mm fan

iStarUSA Inc.

iStarUSA Inc. BPU-350HD-BLACK 3×5.25″ to 5×3.5″/2.5″ 12Gb/s hot-swap rack server accessory

SKU CH-R1K5-RV8D6 MPN BPU-350HD-BLACK

Converts three 5.25″ bays into five hot-swap slots for 2.5″ and 3.5″ SAS or SATA drives with 12Gb/s transfer, an 80mm fan, aluminum chassis and LED status indicators

  • TypeHot-swap Rack
  • SpecificationsRoHS Compliance: Yes Standard Drive Bays: 5 x 3.5" Hotswap 3
  • FeaturesStylish aluminum color handle and heat-sink body Support Hot
  • Fits five 3.5″ and three 5.25″ bays in three external slots
  • Hot-swaps 2.5″ and 3.5″ SAS or SATA drives at up to 12Gb/s
  • Aluminium chassis with conductive grooves keeps drives cool
  • 80mm fan with speed switch balances airflow and noise
  • Power, drive, fan and over-temperature LEDs give instant status

Drive density and hot-swap access

The BPU-350HD-BLACK converts three standard 5.25-inch bays into five hot-swap trays that accept both 2.5-inch and 3.5-inch drives. It is built for server administrators who need to add or replace SAS I/II/III or SATA I/II/III storage without powering down the chassis.

Aluminium chassis with active cooling

The front bezel, handle and main body are machined from aluminium and include conductive dissipation grooves that spread drive heat toward a single 80mm fan. A fan-speed control switch lets operators balance airflow against acoustic output, while LEDs report power status, drive activity, fan operation and high-temperature warnings at a glance.

12 Gb/s interface ceiling and controller dependency

Each tray is wired for up to 12 Gb/s transfer rates, so the backplane itself does not limit modern SAS III or SATA III drives. RAID functionality is not integrated; a separate RAID controller must be installed to configure arrays. The included five SATA cables connect the backplane to that controller or to host bus adapters.

Highlights

  • Fits five 3.5″ and three 5.25″ bays in three external slots
  • Hot-swaps 2.5″ and 3.5″ SAS or SATA drives at up to 12Gb/s
  • Aluminium chassis with conductive grooves keeps drives cool
  • 80mm fan with speed switch balances airflow and noise
  • Power, drive, fan and over-temperature LEDs give instant status

Specifications

BrandiStarUSA
ModelBPU-350HD-BLACK
TypeHot-swap Rack
SpecificationsRoHS Compliance: Yes
Standard Drive Bays:
5 x 3.5" Hotswap
3 x 5.25" Drives
Hotswap HDD Type: 2.5" & 3.5" SAS I/II/III & SATA I/II/III
Indicators: Power, HDD, fan, and high temperature
Material of Front Bezel: Aluminum
Material of Handle: Aluminum
Material of Main Chassis: Aluminum Design with Conductive Dissipation Grooves
Color of Front Bezel: Black
Color of Main Chassis: Black
Package Content: SATA Cable Included (5pcs)
Cooling Fan: 1 x 80mm
Dimensions: 4.96" x 5.75" x 8.25"
FeaturesStylish aluminum color handle and heat-sink body
Support Hot-Swap & RAID Configuration (need an additional RAID controller)
Aluminum Design with Conductive Dissipation Grooves
Power, fan and high temperature LED indicators
High Performance Transfer Rate up to 12Gb/s
Supports Both 2.5" and 3.5" SAS I/II/III & SATA I/II/III HDD / SSD
Equipped with Fan Speed Control Switch
14TB Hard Drives Compatible
Shipping weight1.81 kg
Package size267 × 178 × 165 mm

Questions about this item

What does the 12Gb/s SAS interface cap in real use?

The backplane passes SAS I/II/III and SATA I/II/III signals up to 12Gb/s; actual throughput depends on the drives and controller you connect.

How many 5.25-inch bays does the BPU-350HD-BLACK need to mount?

It occupies three standard 5.25-inch front bays and fits in a chassis depth of 8.25 inches.

What is the common mistake when installing the hot-swap trays?

Insert each 2.5-inch or 3.5-inch drive fully until the tray latch clicks; otherwise the SAS/SATA connector will not seat and the drive will not be detected.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.