We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft KVM cable with DVI-D and USB connectors

IOGEAR

IOGEAR G2L7D02U 6 ft DVI-D Single Link USB 2.0 KVM Cable

SKU CH-YVZQ-P28YP MPN G2L7D02U

Connects a computer to a DVI-D KVM switch with USB 2.0 and 3.5 mm audio, supporting 1920x1200 resolution over six feet

  • Length6 ft.
  • ColorBlack
  • Connectors8
  • SpecificationsDimension: 6" x 1.5" x 7" Weight: 0.7 lbs.
  • FeaturesDVI-D Single Link KVM cable High Resolution: 1920x1200 USB 2
  • Connect two computers with one cable using 8 integrated connectors
  • Extend your KVM setup six feet without signal loss
  • Drive displays up to 1920x1200 over DVI-D Single Link
  • Add USB 2.0 peripheral sharing and 3.5 mm audio/mic support
  • Lightweight 0.7 lb design fits tight rack spaces

What this cable connects

The IOGEAR G2L7D02U links a computer with a DVI-D single-link port and USB 2.0 interface to a compatible KVM switch. It carries digital video up to 1920x1200 resolution alongside keyboard, mouse and analogue audio signals through a single six-foot assembly. The black cable weighs 0.7 lbs and measures 6 by 1.5 by 7 inches.

Bundled connectors and audio

Eight integrated connectors terminate the cable, providing DVI-D video, USB 2.0 data and 3.5 mm jacks for microphone input and speaker output. This consolidation removes the need for separate video, USB and audio cables between the PC and the switch, reducing desktop clutter and connection points.

Single-link DVI-D bandwidth limit

The cable supports a maximum digital resolution of 1920x1200, which is the ceiling of the DVI-D single-link interface it implements. Systems or displays requiring higher resolutions, dual-link bandwidth or DisplayPort and HDMI signalling cannot use this cable and will need a different interconnect.

Highlights

  • Connect two computers with one cable using 8 integrated connectors
  • Extend your KVM setup six feet without signal loss
  • Drive displays up to 1920x1200 over DVI-D Single Link
  • Add USB 2.0 peripheral sharing and 3.5 mm audio/mic support
  • Lightweight 0.7 lb design fits tight rack spaces

Specifications

BrandIOGEAR
ModelG2L7D02U
Length6 ft.
ColorBlack
Connectors8
SpecificationsDimension: 6" x 1.5" x 7"
Weight: 0.7 lbs.
FeaturesDVI-D Single Link KVM cable
High Resolution: 1920x1200
USB 2.0 connectivity
Analog 3.5mm jacks for audio and mic support
Shipping weight0.27 kg
Package size212 × 183 × 51 mm

Questions about this item

Will the DVI-D connectors need replacing after frequent switching?

The DVI-D single link connectors are passive copper contacts rated for the cable's 6 ft length and 1920x1200 resolution; no active components inside require scheduled replacement.

What limits video quality first during extended use at 1920x1200?

The single link DVI-D bandwidth caps the signal at 1920x1200, so resolution cannot exceed that spec regardless of how long the cable runs.

Does the cable generate noticeable heat when the USB 2.0 and audio lines run all day?

The passive copper conductors carry only low voltage USB 2.0 and analogue 3.5 mm audio signals, so the cable stays at ambient temperature during continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.