We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin grey Cat6 patch cable with RJ45 plugs, 7 ft long

Intellinet Network Solutions

Intellinet Network Solutions Slim Ethernet Cable Cat6 U/UTP 7 ft Gray 10G 250 MHz 30 AWG

SKU CH-SRG2-70FQ3

Slim Cat6 patch cord supports 10 Gbps at 250 MHz with pure copper conductors and gold-plated RJ45 contacts

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length7 ft.
  • ColorGray
  • Supports 10 Gbps data rates at 250 MHz bandwidth
  • 100 % bare copper conductors ensure maximum conductivity
  • Gold-plated RJ45 contacts resist corrosion in any environment
  • Snag-free boots protect connectors during pulls through tight spaces
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

Seven-foot Cat6 slim patch cable

This seven-foot Cat6 U/UTP patch cable uses 30 AWG stranded copper conductors to deliver 10 Gbps at 250 MHz. The ultra-thin profile suits dense cabinet runs and tight corners where standard cables are difficult to route. It is built for installers and network managers who need high-speed links in confined spaces. The grey jacket is colour-coded for T568A and T568B wiring schemes.

Check port spacing and PoE class

Verify that the RJ45 ports on your switches, patch panels or endpoints accept snag-free boots without blocking adjacent jacks. Confirm the connected equipment supports the required PoE class up to IEEE 802.3bt so the 100 per cent copper conductors can carry the intended power budget. Ensure the 7 ft length reaches between devices without excess slack that could impede airflow.

Gold contacts and snag-free boots

Gold-plated contacts resist corrosion in humid or temperature-variable environments. Snag-free boots protect the latch tabs when pulling cables through cable managers or around 45 degree bends. The stranded construction and heavy-duty strain relief withstand repeated flexing during moves or re-terminations. The slim diameter improves airflow around active gear in crowded racks.

Highlights

  • Supports 10 Gbps data rates at 250 MHz bandwidth
  • 100 % bare copper conductors ensure maximum conductivity
  • Gold-plated RJ45 contacts resist corrosion in any environment
  • Snag-free boots protect connectors during pulls through tight spaces
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length7 ft.
ColorGray
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

Does the 7 ft cable come with both RJ45 ends already attached or do I need to buy connectors separately?

The cable has RJ45 connectors on both ends, gold-plated and snag-free, so nothing extra is required.

The spec lists 10G and 250 MHz — which one should I base my choice on for a home office?

Both figures describe the same Cat6 cable; 10G is the maximum data rate and 250 MHz is the frequency rating, so the single 7 ft gray model covers both.

Will the 10 Gbps rating hold up when the cable runs behind a desk alongside power cords?

The stranded 30 AWG pure copper construction with gold-plated contacts meets ISO/IEC 11801 and EN 50288, supporting 10 Gbps at 250 MHz even in tight, mixed-cable runs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.