We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ultra-thin black Cat6 patch cable, .5 ft, snag-free RJ45 connectors

Intellinet Network Solutions

Intellinet Network Solutions Slim Cat6 U/UTP Patch Cable 0.5 ft Black

SKU CH-F885-1X2JM

A 0.5 ft Cat6 slim patch cable supporting 10 Gbps at 250 MHz with 30 AWG stranded copper, gold-plated RJ45 connectors and snag-free boots for dense installations

  • TypeNetwork Ethernet Cables
  • Cat6
  • Connector ARJ45
  • Connector BRJ45
  • Length0.5 ft.
  • ColorBlack
  • Supports 10 Gbps data rates at 250 MHz
  • 100% pure bare copper ensures maximum conductivity
  • Gold-plated contacts resist corrosion in all environments
  • Snag-free boots protect RJ45 connectors during installation
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

Slim Cat6 patch cable for tight spaces

This Intellinet Network Solutions Cat6 U/UTP cable measures 0.5 ft and uses 30 AWG stranded copper conductors. The ultra-thin profile eases routing in crowded racks and around corners while supporting 10 Gbps at 250 MHz. Gold-plated RJ45 contacts and snag-free boots protect the connection during frequent moves.

Suited for dense cabinets and short PoE runs

Installers who need a flexible, space-saving link for HDBaseT or IEEE802.3bt PoE++ equipment will benefit from the pure copper core and reduced diameter. Builders requiring shielded cable, longer reach or solid-core conductors for permanent infrastructure should look at something else.

0.5 ft length decides the use case

At half a foot the cable only bridges adjacent ports on a switch, patch panel or wall jack. Any run that spans racks, crosses a room or connects floor-standing gear needs a longer cable.

Highlights

  • Supports 10 Gbps data rates at 250 MHz
  • 100% pure bare copper ensures maximum conductivity
  • Gold-plated contacts resist corrosion in all environments
  • Snag-free boots protect RJ45 connectors during installation
  • Ultra-thin 30 AWG stranded design simplifies dense cable management

Specifications

BrandIntellinet Network Solutions
ModelSlim Ethernet Cable
TypeNetwork Ethernet Cables
Cat6
Connector ARJ45
Connector BRJ45
Length0.5 ft.
ColorBlack
ShieldedNo
Features10G, 250 MHz, 100% Copper, 30 AWG, RJ45, Stranded, Snag-free, Gold-plated Contacts

Questions about this item

How much heat does the 30 AWG cable add when it carries PoE++ power all day?

The 30 AWG pure copper conductors keep resistive heating low even at full IEEE 802.3bt PoE++ loads, and the slim profile improves airflow in crowded cabinets.

What devices must already have RJ45 ports for this 0.5 ft patch cord to work?

Both ends need standard RJ45 jacks — any switch, router, server, patch panel or IP camera with an 8P8C socket will connect directly.

Will the 250 MHz Cat6 cable link correctly with older Cat5e gear at 1 Gbps?

Yes, the T568A/B wired RJ45 plugs are fully backward compatible, so the cord negotiates 1 Gbps on legacy Cat5e ports without configuration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.