We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex SC-to-SC single-mode fiber patch cable, 7 m long, 2.0 mm jacket, bend-insensitive G.657.A1

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF SC to SC 7 m 9/125 µm G.657.A1 Yellow

SKU CH-KZRM-NMA00

A 7 m yellow singlemode duplex patch cable with SC/SC UPC connectors, bend-insensitive G.657.A1 fiber and Corning glass for 40G Ethernet links

  • TypeFiber
  • Connector ASC
  • Connector BSC
  • Length7 m
  • ColorYellow
  • ShieldedNo
  • Bend-insensitive G.657.A1 fiber reduces attenuation during tight routing
  • Corning ultra-pure glass core delivers low loss for 40G Ethernet links
  • UPC polish on SC connectors improves return loss for cleaner signals
  • OS2 single-mode 9/125 µm construction supports long-distance high-speed runs
  • 7 m yellow duplex jacket simplifies identification in patch panels

Singlemode Duplex BIF Cable

This 7 m singlemode duplex patch cable uses 9/125 µm bend-insensitive fiber compliant with G.657.A1. It is built for interconnect and cross-connect links in entrance facilities, telecommunications rooms, data centres and desk-side connections. Yellow OFNR jacket identifies the singlemode run at a glance.

SC UPC Connectors Low Loss

SC ultra-physical-contact connectors on both ends deliver a superior surface finish and reduced return loss. Corning ultra-pure glass fiber provides low attenuation and high bandwidth for 40 G Ethernet and beyond. Each unit ships with its individual test report for traceability.

Bend-Insensitive Routing Durability

The bend-insensitive design maintains signal integrity when the cable is routed around tight corners or twisted during installation. This reduces attenuation in dense patching environments and simplifies long-term maintenance without sacrificing the high data rates required by modern singlemode links.

Highlights

  • Bend-insensitive G.657.A1 fiber reduces attenuation during tight routing
  • Corning ultra-pure glass core delivers low loss for 40G Ethernet links
  • UPC polish on SC connectors improves return loss for cleaner signals
  • OS2 single-mode 9/125 µm construction supports long-distance high-speed runs
  • 7 m yellow duplex jacket simplifies identification in patch panels

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ASC
Connector BSC
Length7 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

How do I install the 7 m SC to SC duplex patch cable and what step do people often get wrong?

Connect the yellow SC connectors with the keyed orientation so each transmit port meets the matching receive port; the common mistake is crossing the duplex pair and reversing the signal path.

What maintenance or replacement will the G.657.A1 bend-insensitive fiber need later?

Inspect the SC/UPC end faces for contamination before each reconnection and clean with a lint-free wipe and isopropyl alcohol; the Corning glass core itself requires no scheduled replacement.

What limit appears first on this 9/125 µm OS2 cable during sustained 40G Ethernet use?

The 2.0 mm OFNR jacket temperature rating is reached before the single-mode fiber attenuation budget is exhausted in typical indoor installations.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.