We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex fiber patch cable with SC connectors, 2 m length

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF SC/SC 2 m Yellow 9/125 µm G.657.A1

SKU CH-A3QM-HMGAK

Singlemode duplex patch cable with bend-insensitive G.657.A1 fiber for 40G Ethernet links

  • TypeFiber
  • Connector ASC
  • Connector BSC
  • Length2 m
  • ColorYellow
  • ShieldedNo
  • OS2 single mode fiber supports 40G Ethernet and beyond
  • Bend-insensitive G.657.A1 design reduces attenuation when cables are bent
  • Corning ultra-pure glass core delivers low attenuation and high bandwidth
  • UPC connectors provide superior surface finish and improved return loss
  • Each cable includes a factory test report for verified performance

Singlemode Duplex BIF SC/SC 2 m

This 2 m singlemode duplex patch cable uses SC/UPC connectors on both ends for interconnect and cross-connect work in entrance facilities, telecom rooms and data centres. The yellow jacket identifies the OS2 singlemode glass inside, which is specified for 40G Ethernet and higher data rates.

Bend-insensitive G.657.A1 under sustained routing

Corning ultra-pure glass and the G.657.A1 bend-insensitive design keep attenuation low when the cable is routed around tight corners or managed in dense patch panels. The 9/125 µm core maintains consistent return loss over long runs, so sustained 40G throughput remains stable without the signal degradation that tight bends cause on standard singlemode fibre.

Check connector polish

Verify that your equipment uses SC connectors with UPC polish; angled APC ferrules will not mate correctly with these ends. Confirm that an OFNR-rated 2.0 mm jacket satisfies your local fire-code requirements for the intended pathway, and ensure the 2 m length reaches between your patch panel and active gear without excess slack.

Highlights

  • OS2 single mode fiber supports 40G Ethernet and beyond
  • Bend-insensitive G.657.A1 design reduces attenuation when cables are bent
  • Corning ultra-pure glass core delivers low attenuation and high bandwidth
  • UPC connectors provide superior surface finish and improved return loss
  • Each cable includes a factory test report for verified performance

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ASC
Connector BSC
Length2 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

Does the 2.0 mm yellow jacket add noticeable heat or power draw when the cable runs all day in a 40G Ethernet link?

No — the passive singlemode fiber carries light, not electricity, so it generates no heat and draws no power regardless of data rate or duty cycle.

What connectors must the buyer already have on the switch and patch panel for this SC/SC duplex cable to plug in directly?

Both ends need SC ports with UPC polish; the cable terminates in SC connectors on each side, so the mating hardware must provide matching SC adapters.

Will the G.657.A1 bend-insensitive fiber work reliably alongside older OS2 cables that lack bend-insensitive ratings?

Yes — G.657.A1 is fully compatible with standard OS2 9/125 µm singlemode fiber, so it can be mixed in the same link or patch field without performance penalties.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.