We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 50 m singlemode duplex LC/LC fiber patch cable with 2.0 mm jacket

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF LC/LC 50 m 9/125 µm G.657.A1 Yellow

SKU CH-SFRB-57FRP

A 50 metre singlemode duplex patch cable with LC/UPC connectors, bend-insensitive G.657.A1 fibre and Corning glass for 40G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length50 m
  • ColorYellow
  • ShieldedNo
  • UPC connectors cut return loss for cleaner signals
  • 50 m OS2 single-mode fiber supports 40G Ethernet and beyond
  • Bend-insensitive G.657.A1 design keeps loss low on tight bends
  • Corning ultra-pure glass core delivers low attenuation over distance
  • Each cable ships with its own factory test report

Singlemode Duplex BIF LC/LC 50 m

This 50 metre singlemode duplex patch cable uses 9/125 µm OS2 fibre with bend-insensitive G.657.A1 glass. It terminates in LC/UPC connectors on both ends and is rated for 40G Ethernet and higher data rates. The yellow OFNR jacket measures 2.0 mm in diameter. It suits installers who need low-loss links across entrance facilities, telecom rooms, data centres or desk connections.

Replaces legacy tight-bend singlemode leads

Older singlemode patch cords lose signal when routed around tight corners or through dense patch panels. This cable’s Corning ultra-pure glass and G.657.A1 construction keep attenuation low even when bent, so the upgrade pays off whenever routing space is limited or moves, adds and changes are frequent. Buyers who need multimode or armoured cable cannot use this product.

Fits standard LC patch panels and transceivers

The duplex LC/UPC ends plug directly into compatible ports without adapters, freeing rack space compared to bulkier connector types. The 50 m length (164 ft) spans typical intra-building runs while the 2.0 mm jacket eases cable management. Each unit ships with a factory test report. Installers who require SC, ST or MPO terminations must source different cables.

Highlights

  • UPC connectors cut return loss for cleaner signals
  • 50 m OS2 single-mode fiber supports 40G Ethernet and beyond
  • Bend-insensitive G.657.A1 design keeps loss low on tight bends
  • Corning ultra-pure glass core delivers low attenuation over distance
  • Each cable ships with its own factory test report

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length50 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

What connector type and fiber diameter does the 50 m cable use?

It has LC connectors on both ends and a 9/125 µm singlemode fiber core.

How do you install the LC duplex patch cord without damaging the bend-insensitive fiber?

Route the 2.0 mm jacket along cable trays or ducts, respect the G.657.A1 minimum bend radius, and push each LC ferrule straight into the adapter until it clicks.

What cleaning method keeps the UPC ferrules ready for 40G Ethernet links?

Use a one-click cleaner on each ferrule end-face, then verify with an inspection scope; any residue or scratches will degrade return loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.