We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex singlemode fiber patch cable with LC connectors on both ends, 40 m length, 2.0 mm jacket, bend insensitive G.657.A1

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF LC-LC 40 m Yellow 9/125 µm G.657.A1

SKU CH-PEJ5-C7WZG

Singlemode duplex fiber patch cable with LC connectors, 40 m length, bend-insensitive G.657.A1 design and UPC polish for low loss

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length40 m
  • ColorYellow
  • ShieldedNo
  • Low return loss with UPC polished connectors
  • 40 m singlemode duplex reach for long links
  • Bend-insensitive G.657.A1 fiber reduces attenuation on tight routes
  • Corning ultra-pure glass core for low-loss transmission
  • Each cable includes a factory test report

Intellinet Singlemode Duplex Patch Cable

This 40 metre singlemode duplex cable uses LC to LC UPC connectors and OS2 fibre rated for 9/125 µm. It is built for installers and network engineers who need reliable long-distance links in data centres, telecom rooms or at the desk. The yellow jacket identifies the singlemode type at a glance.

Sustained-Load Behaviour

Corning ultra-pure glass and G.657.A1 bend-insensitive construction keep attenuation low even when the 2.0 mm cord is routed around tight corners or cable trays. UPC end-faces maintain consistent return loss so signal quality holds steady across the full 131 foot run under continuous high-speed traffic.

Critical Spec: OS2 Singlemode 9/125 µm for 40G

The OS2 singlemode 9/125 µm core is the single parameter that decides compatibility with 40G Ethernet and higher-rate links. Buyers who need multimode OM3 or OM4 cores for shorter-reach campus runs should select a different cable type.

Highlights

  • Low return loss with UPC polished connectors
  • 40 m singlemode duplex reach for long links
  • Bend-insensitive G.657.A1 fiber reduces attenuation on tight routes
  • Corning ultra-pure glass core for low-loss transmission
  • Each cable includes a factory test report

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length40 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

How much power does the 40 m singlemode fiber cable draw when it runs all day?

The passive fiber assembly consumes no electrical power during operation.

What equipment must I already have to use the LC duplex connectors on this cable?

You need transceivers or patch panels with LC UPC ports that accept 9/125 µm singlemode fiber.

Will the G.657.A1 bend-insensitive fiber work with the older OS2 patch cords I keep in the rack?

Yes, the G.657.A1 fiber is fully compatible with standard OS2 singlemode cables already installed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.