We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex singlemode fiber patch cable, LC/LC connectors, 2.0 mm jacket, 8 m length

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF Fiber Cable 8 m LC/LC 2.0 mm Yellow 9/125 µm G.657.A1

SKU CH-W3CZ-9DCFE

Singlemode duplex patch cable with LC connectors on both ends, bend-insensitive G.657.A1 fiber rated for 40G Ethernet, 8 m length in yellow 2.0 mm jacket

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length8 m
  • ColorYellow
  • ShieldedNo
  • Low return loss from UPC connectors for cleaner signals
  • Bend-insensitive G.657.A1 fibre reduces attenuation on tight routes
  • Corning ultra-pure glass core delivers low loss and high bandwidth
  • OS2 single-mode rated for 40G Ethernet and beyond
  • Each cable ships with its own test report

Singlemode Duplex BIF Cable 8 m

This fiber patch cable uses OS2 single-mode glass with a 9/125 µm core and G.657.A1 bend-insensitive design. It is built for installers who need low loss in tight trays or patch panels. The yellow jacket identifies single-mode use at a glance.

UPC LC connectors limit return loss

Each end carries an LC UPC polish that improves surface finish and cuts back-reflection. The 2.0 mm duplex cordage is OFNR rated for indoor riser runs. Single-mode physics still require clean end-faces and proper alignment; dirty ferrules will degrade the link.

40G Ethernet reach depends on the standard

The cable supports the low attenuation and high bandwidth needed for 40G Ethernet and beyond, but maximum distance is set by the transceiver specification, not by the patch cord alone. Buyers who need multimode compatibility or a different connector type should choose another product.

Highlights

  • Low return loss from UPC connectors for cleaner signals
  • Bend-insensitive G.657.A1 fibre reduces attenuation on tight routes
  • Corning ultra-pure glass core delivers low loss and high bandwidth
  • OS2 single-mode rated for 40G Ethernet and beyond
  • Each cable ships with its own test report

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length8 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

Should I choose the 8 m length or a different length for my patch-panel run?

The cable is supplied at 8 m (26 ft). Select a length that reaches between your two LC ports with enough slack for routing, but avoid excess coil that could increase bend loss.

What does the 9/125 µm specification mean for my 40G Ethernet link?

It indicates OS2 single-mode fiber with a 9 µm core and 125 µm cladding, delivering the low attenuation and high bandwidth needed for 40G Ethernet and longer-distance runs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.