We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 25 m singlemode duplex fiber patch cable with LC UPC connectors on both ends, 2.0 mm jacket, G.657.A1 bend-insensitive

Intellinet Network Solutions

Intellinet Network Solutions Singlemode Duplex BIF 25 m LC/LC UPC 9/125 µm G.657.A1 Yellow

SKU CH-CSEA-Z29QB

A 25 metre single-mode duplex patch cable with LC/UPC connectors, bend-insensitive G.657.A1 fiber and Corning glass for 40G Ethernet links

  • TypeFiber
  • Connector ALC
  • Connector BLC
  • Length25 m
  • ColorYellow
  • ShieldedNo
  • 25 m length supports extended interconnect runs
  • LC/UPC connectors deliver low return loss for clean signals
  • Bend-insensitive G.657.A1 fiber reduces attenuation on tight bends
  • Corning ultra-pure glass core enables low-loss 40G Ethernet links
  • Ships with factory test report verifying performance

Product identity

This 25 m singlemode duplex patch cable uses LC/UPC connectors on both ends and 9/125 µm bend-insensitive fiber rated to G.657.A1. It suits installers who need a pre-terminated yellow OFNR link for data-centre cross-connects or desk-side patching.

Build integration

The 2.0 mm jacket routes easily through dense cable managers and patch panels without special tools. Because it is a passive fiber assembly, it requires no power, drivers or configuration and simply bridges two LC ports in a rack or wall outlet.

Sustained behaviour

Bend-insensitive Corning glass keeps attenuation low when the cable is bent around tight corners or routed through congested trays. UPC end-face polish maintains stable return loss over long runs, supporting 40 G Ethernet and higher speeds without signal degradation.

Highlights

  • 25 m length supports extended interconnect runs
  • LC/UPC connectors deliver low return loss for clean signals
  • Bend-insensitive G.657.A1 fiber reduces attenuation on tight bends
  • Corning ultra-pure glass core enables low-loss 40G Ethernet links
  • Ships with factory test report verifying performance

Specifications

BrandIntellinet Network Solutions
ModelSinglemode Duplex BIF
TypeFiber
Connector ALC
Connector BLC
Length25 m
ColorYellow
ShieldedNo
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A1

Questions about this item

What is the maximum bend radius before signal loss increases on this G.657.A1 singlemode fiber?

The G.657.A1 bend-insensitive design reduces attenuation when bent or twisted, enhancing installation efficiency in tight spaces without specifying a minimum bend radius.

How much heat does the 25 m duplex cable generate during continuous 40G Ethernet operation?

Passive fiber cables generate no measurable heat during data transmission; thermal load comes only from connected active equipment such as transceivers and switches.

Which transceiver interface is required at each end for this LC UPC OS2 patch cord to function?

Each end requires an LC-compatible singlemode transceiver or media converter with UPC polishing to match the cable's OS2 9/125 µm fiber and duplex connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.