We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow duplex fiber patch cable with SC UPC and SC APC connectors, 1 m length, 2.0 mm jacket

Intellinet Network Solutions

Intellinet Network Solutions SC UPC to SC APC Duplex Singlemode BIF 1 m 9/125 µm Yellow 2.0 mm OFNR G.657.A1

SKU CH-DJX6-S7YQG

A 1 m duplex singlemode fiber patch cable with UPC to APC connectors, 9/125 µm bend-insensitive G.657.A1 glass, OFNR jacket, and 40G Ethernet capability

  • TypeFiber
  • Length1 m
  • ColorYellow
  • Features9/125 µm, Bend Insensitive Fiber Cable G.657.A9
  • UPC connectors improve return loss with superior surface finish
  • APC angled connectors reduce signal reflection for stable performance
  • Bend-insensitive G.657.A1 fiber minimises attenuation when twisted
  • OS2 singlemode 9/125 µm core supports 40G Ethernet speeds
  • Includes factory test report verifying cable quality

Singlemode Duplex Patch Cable

This one-metre singlemode duplex patch cable uses 9/125 µm bend-insensitive fibre built to G.657.A1. It is fitted with a UPC connector on one end and an APC connector on the other, giving low return loss for high-speed links. The yellow 2.0 mm OFNR jacket meets riser flame ratings for indoor routing. Each unit ships with a factory test report.

Installers and Data-Centre Technicians

The cable suits engineers who need a short riser-rated jumper between patch panels, transceivers or wall outlets in telecom rooms and data centres. It is not for buyers who require multimode fibre, a different connector polish, or a longer run than the supplied length.

Riser-Rated Indoor Links

The OFNR jacket allows installation in vertical shafts and general indoor pathways without conduit. Bend-insensitive glass reduces attenuation on tight bends, freeing slack management in dense cabinets. The UPC-to-APC pairing connects equipment with mismatched polish types while keeping reflection low for 40G Ethernet and faster signals.

Highlights

  • UPC connectors improve return loss with superior surface finish
  • APC angled connectors reduce signal reflection for stable performance
  • Bend-insensitive G.657.A1 fiber minimises attenuation when twisted
  • OS2 singlemode 9/125 µm core supports 40G Ethernet speeds
  • Includes factory test report verifying cable quality

Specifications

ModelSinglemode Duplex BIF, UPC to APC
TypeFiber
Length1 m
ColorYellow
Features9/125 µm, Bend Insensitive Fiber Cable G.657.A9

Questions about this item

What equipment must I already have to use this SC UPC to SC APC duplex cable?

You need two devices or patch panels with SC ports, one accepting UPC polish and the other APC polish, for a singlemode duplex link.

Will this 9/125 µm G.657.A1 bend-insensitive cable work with older OS2 singlemode patch panels I keep?

Yes, the OS2 singlemode fiber and SC connectors are fully compatible with legacy OS2 panels and equipment.

How can I verify the 1 m cable is performing correctly after installation?

Each cable ships with a factory test report; confirm the measured insertion loss and return loss match the values on that report.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.