We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular outdoor PoE extender with two RJ45 ports and rubber-sealed IP65 housing

Intellinet Network Solutions

Intellinet Network Solutions Outdoor Gigabit PoE+ Extender 561211

SKU CH-Y2FA-D4B3N

Extends PoE connections up to 328 ft with 25 W output, IP65 rated for -40 to 75 °C operation and daisy-chainable to 1640 ft

  • Delivers 25 W to PoE devices via Cat5e or Cat6
  • Daisy-chain up to five units for 1640 ft total reach
  • IP65 rated enclosure withstands -40 °C to 75 °C outdoor conditions
  • Draws power from PoE source — no separate supply needed
  • Built-in short-circuit, overload and surge protection with grounding point

Outdoor PoE+ Extender 561211

The Intellinet 561211 is a two-port outdoor Gigabit PoE+ extender that draws power from an existing PoE, PoE+ or Ultra PoE source. It is built for installers who need to place IP cameras, wireless access points or VoIP phones beyond the standard Ethernet limit without running separate AC power. The rugged IP65-rated enclosure with rubber seals allows deployment in exposed locations.

Thermals, noise and power draw

The unit operates silently with no moving parts across a temperature range of -40 to 75 °C. It passes up to 25 W to the connected PoE device while consuming only the power it needs from the incoming PoE feed. Built-in short-circuit, overload and high-voltage protection plus a grounding point safeguard attached equipment during normal operation.

Sustained-load behaviour

Daisy-chaining up to four extenders extends the total link to 1640 ft while maintaining 10/100/1000 Mbps throughput. Each hop adds 328 ft of reach, so a five-extender chain covers the full distance without signal degradation. The extender requires no configuration and continues forwarding power and data indefinitely as long as the PoE source remains active.

Highlights

  • Delivers 25 W to PoE devices via Cat5e or Cat6
  • Daisy-chain up to five units for 1640 ft total reach
  • IP65 rated enclosure withstands -40 °C to 75 °C outdoor conditions
  • Draws power from PoE source — no separate supply needed
  • Built-in short-circuit, overload and surge protection with grounding point

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 561211 extender and what step is often missed?

Connect the PoE In port to your PoE injector or switch and the PoE Out port to the powered device. The step often missed is attaching the grounding point to protect against electrical surges.

What part of the 561211 will need replacement after extended outdoor use?

The rubber seals that provide the IP65 weather protection can degrade over time in harsh conditions and may eventually need replacement to maintain the ingress rating.

What is the first limit reached when daisy-chaining multiple 561211 units under sustained load?

The 25 W power budget per extender is the first limit; each unit passes only up to 25 W to the next device, so total available power drops with every hop in the chain.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.