We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with uniboot LC connectors and push-pull tabs, 3 m length

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Uniboot Pull-push tab 3 m Aqua 50/125 µm BIMMF

SKU CH-2FHX-D43ZP

A 3 m duplex OM4 multimode patch cable with uniboot LC/UPC connectors and a push-pull tab for tool-free use in high-density 40G Ethernet links

  • TypeFiber
  • Length3 m
  • ColorAqua
  • Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC
  • Uniboot design cuts cable bulk in dense racks
  • Push-pull tab enables tool-free changes in tight panels
  • OM4 multimode fiber supports 40G and 100G links
  • Bend-insensitive 50/125 µm glass reduces loss on tight bends
  • UPC polish improves return loss for cleaner signals

3 m OM4 duplex patch cable for high-density links

This 3 m aqua duplex cable uses OM4 50/125 µm bend-insensitive multimode fiber with LC UPC uniboot connectors. It is built for interconnect and cross-connect runs in entrance facilities, telecommunications rooms, data centres and at the desk. The push-pull tab allows tool-free insertion and removal in dense panels. Corning ultra-pure glass provides low attenuation and reliable 40G Ethernet support.

Sustained load behaviour in dense installations

Bend-insensitive multimode fiber keeps attenuation low when the cable is routed around tight corners or bundled in crowded trays. The uniboot design halves the cable count compared with standard duplex zipcord, reducing airflow obstruction and easing long-term cable management. UPC end-face polish maintains stable return loss across repeated mating cycles in active patching fields.

Compatibility checks before ordering

Verify that both ends of the link accept LC duplex connectors with UPC polish and that the active equipment supports OM4 multimode transmission at the required distance. Confirm the patch panel or switch port density can accommodate the uniboot form factor and that the OFNR jacket rating meets local fire-code requirements for the intended pathway.

Highlights

  • Uniboot design cuts cable bulk in dense racks
  • Push-pull tab enables tool-free changes in tight panels
  • OM4 multimode fiber supports 40G and 100G links
  • Bend-insensitive 50/125 µm glass reduces loss on tight bends
  • UPC polish improves return loss for cleaner signals

Specifications

ModelOM4 Multimode Uniboot Pull-push tab
TypeFiber
Length3 m
ColorAqua
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Does the uniboot pull-push tab generate heat or consume power when the 3 m OM4 cable runs continuously in a 40G Ethernet link?

No, this is a passive fiber patch cable with no active electronics, so it produces no heat and draws no power regardless of how long the 40G link operates.

What connectors must my equipment already provide for the LC UPC duplex ends on this aqua OM4 patch cord?

Your transceivers or patch panels need standard LC duplex ports with UPC polishing; the uniboot simply combines both fibers into one 2.0 mm jacket.

Will the bend-insensitive 50/125 µm fiber work reliably alongside legacy OM3 cables in the same 10G or 40G backbone?

Yes, OM4 is backward-compatible with OM3 at the same 50/125 µm core size, so mixed runs at 10G and 40G will meet the tighter OM3 loss budget without extra configuration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.