We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with LC and SC connectors, 3 m length

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC to SC UPC 3 m Aqua 50/125 µm BIMMF

SKU CH-MQ48-97CKA

Connects LC and SC equipment with OM4 multimode fiber for 10, 40 and 100 GbE links up to 3 m

  • TypeFiber
  • Connector ALC
  • Connector BSC
  • Length3 m
  • ColorAqua Blue
  • ShieldedNo
  • Ultra Physical Contact connectors deliver improved return loss for cleaner signals
  • OM4 multimode fiber supports 10G, 40G and 100G Ethernet speeds
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • Corning ultra-pure glass fiber provides low attenuation and high bandwidth
  • Includes a test report with every cable for verified performance

Versatile Connectivity for Data Centers

This OM4 multimode duplex patch cable links LC and SC UPC connectors across a 3 m run. It is built for interconnect and cross-connect tasks in entrance facilities, telecommunications rooms and data centers. The aqua jacket identifies the 50/125 µm fiber type at a glance. Each unit ships with a factory test report.

Sustained High-Speed Transmission

Bend-insensitive multimode fiber reduces attenuation when the cable is routed around tight corners or through dense trays. Corning ultra-pure glass cores deliver low loss and high bandwidth for 10, 40 and 100 G Ethernet links. UPC polish on both ends improves return loss compared with standard PC finishes. The 2.0 mm duplex zipcord maintains consistent geometry under continuous load.

Straightforward Installation Steps

Pre-terminated LC and SC connectors eliminate field polishing and epoxy work. The bend-insensitive design tolerates tighter bends without performance penalty, easing cable management in crowded racks. OFNR rating permits in-building riser runs without conduit. The only common issue is mismatching the connector gender or fiber type at the far-end equipment.

Highlights

  • Ultra Physical Contact connectors deliver improved return loss for cleaner signals
  • OM4 multimode fiber supports 10G, 40G and 100G Ethernet speeds
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • Corning ultra-pure glass fiber provides low attenuation and high bandwidth
  • Includes a test report with every cable for verified performance

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BSC
Length3 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Does the 3 m OM4 duplex cable generate any heat or noise during continuous 40G Ethernet operation?

No, the passive fiber assembly has no active components, so it produces zero heat and no audible noise regardless of data rate or duty cycle.

What equipment must already have LC and SC UPC ports for this patch cord to plug in directly?

Both ends require matching UPC-polished transceivers or patch panels — one side with LC duplex, the other with SC duplex — operating at 50/125 µm multimode wavelengths.

Can the aqua OM4 jumper connect directly to older OM3 50/125 µm transceivers without adapter panels?

Yes, OM4 is fully backward-compatible with OM3 50/125 µm interfaces; the same LC and SC UPC connectors mate physically and support 10G, 40G and 100G Ethernet links.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.