We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua blue duplex fiber patch cable with LC and SC connectors, 5 m length

Intellinet Network Solutions

Intellinet Network Solutions OM4 Multimode Duplex LC/SC 5 m Aqua Blue 50/125 µm BIMMF UPC

SKU CH-STEB-J3NQ6

Connects LC and SC equipment with OM4 multimode fiber rated for 10G, 40G and 100G Ethernet, using bend-insensitive 50/125 µm Corning glass and UPC polish for low loss

  • TypeFiber
  • Connector ALC
  • Connector BSC
  • Length5 m
  • ColorAqua Blue
  • ShieldedNo
  • OM4 multimode fiber supports 40G and 100G Ethernet speeds
  • UPC connectors deliver low return loss for reliable signal integrity
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • Corning ultra-pure glass fiber ensures low attenuation and high bandwidth
  • 5 m duplex LC to SC patch cable suits data center cross-connects

Aqua OM4 Duplex Patch Cable

This 5 m duplex patch cable uses OM4 multimode fiber with LC and SC UPC connectors. The aqua jacket identifies the OM4 grade and the 50/125 µm core/cladding dimensions. Bend-insensitive Corning glass reduces attenuation when the cable is routed around tight corners. A factory test report ships with every unit.

Data-center links up to 100 G Ethernet

Suited for cross-connect and interconnect runs in entrance facilities, telecom rooms and data centers where 10 G, 40 G or 100 G Ethernet is deployed. Not intended for single-mode infrastructure or for outdoor plant installations that require OS2 cable. Buyers needing APC polished ferrules or a different connector combination should select another part.

OM4 50/125 µm bend-insensitive multimode fiber

The OM4 multimode core delivers the bandwidth headroom required for 40 G and 100 G Ethernet over the 5 m reach. UPC finish on both connectors provides low return loss for stable links. The 2.0 mm jacket meets OFNR fire rating for indoor riser use.

Highlights

  • OM4 multimode fiber supports 40G and 100G Ethernet speeds
  • UPC connectors deliver low return loss for reliable signal integrity
  • Bend-insensitive design reduces attenuation when cables are bent or twisted
  • Corning ultra-pure glass fiber ensures low attenuation and high bandwidth
  • 5 m duplex LC to SC patch cable suits data center cross-connects

Specifications

BrandIntellinet Network Solutions
ModelOM4 Multimode Duplex
TypeFiber
Connector ALC
Connector BSC
Length5 m
ColorAqua Blue
ShieldedNo
Features50/125 µm, Bend Insensitive Multimode Fiber (BIMMF), UPC

Questions about this item

Will the 2.0 mm duplex jacket fit through standard LC and SC patch-panel openings?

The 2.0 mm duplex jacket is sized for standard LC and SC patch-panel cut-outs, so it routes through typical panel openings without force.

What is the correct way to seat the UPC ferrules, and what step do installers often skip?

Push each connector straight in until the latch clicks; the step often skipped is cleaning the ferrule end-face with a lint-free wipe and isopropyl alcohol before insertion.

When should the cable be replaced based on the included test report values?

Replace the cable if a later insertion-loss test shows loss exceeding the original test-report baseline, or if the aqua jacket shows kinks, cracks or connector ferrule damage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.